SS28B2035-15

Series:	--
Part Status:	Active
Type:	Round
Design:	Hinged (Snap On)
Impedance @ Frequency:	270 Ohm @ 100MHz
Material:	28
Inner Dimension:	0.850" W x 0.043" H (21.60mm x 1.10mm)
Outer Dimension:	1.126" W x 1.157" H (28.60mm x 29.40mm)
Ratings:	--
Mounting Type:	Free Hanging
Length:	1.252" (31.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

---

Ferrite Cores - Cables and Wiring are of various types, each one having different applications and working principles. One of the common cores used in this category is the SS28B2035-15. This core consists of 6 columns of turns positioned around an angled ferrite core. The core can be used for various applications such as signal line protection, RF interference reduction, motor noise suppression, and voltage surges. The general working principle of the SS28B2035-15 core is to absorb and reduce the energy of high frequency signals. This core acts as a barrier which reduces the transfer of high frequency signals from the source (input) to the load (output). The ferrite core also helps dissipate any unnecessary EMI/RFI that can interfere with the quality of the signal. The SS28B2035-15 core works best in applications where the AC or RF signal has a range of 50MHz-200MHz. This core can also be used for applications where the AC frequency range is above 200MHz. However, for this scenario, the SS28B2035-15 Core should be combined with other materials such as EMI filter cores or ferrite beads. When it comes to signal line protection, the SS28B2035-15 Core can help protect the circuit from voltage surges and surges caused by overloading. The core reduces the amount of current that is transferred to the load. This helps reduce any power losses or heat generated by the transfer of excess current. In addition, the core helps reduce any EMI or RFI interference that may affect the signal quality. In motor noise suppression, the SS28B2035-15 Core helps reduce the amount of noise generated by the motor during operation. This noise, also known as motor hum, is generated by the interaction between the motor\'s magnetic field and the electrical field around it. The ferrite core absorbs some of the electrical noise and to help reduce the noise. The SS28B2035-15 Core is also used for RF interference reduction. This core helps to reduce the amount of interference that is created when two or more signals overlap and interfere with each other. The core helps to reduce this interference and to reduce any EMI or RFI that may be present in the environment. In conclusion, the SS28B2035-15 Core is used in various applications and is a great choice for signal line protection, RF interference reduction, motor noise suppression, and voltage surge protection. The core works best in applications where the AC or RF signal has a frequency range of 50MHz-200MHz. However, for higher frequency applications the SS28B2035-15 Core may need to be combined with other materials, such as filter cores or ferrite beads.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description