SSCDRRN005NDAA5

Series:	TruStability® SSC
Part Status:	Active
Pressure Type:	Differential
Operating Pressure:	±0.18 PSI (±1.25 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.25%
Voltage - Supply:	4.95 V ~ 5.05 V
Port Size:	Male - 0.08" (1.93mm) Tube, Dual
Port Style:	Barbed
Features:	Amplified Output, Temperature Compensated
Termination Style:	PC Pin
Maximum Pressure:	±10.84 PSI (±74.75 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	8-DIP (0.524", 13.30mm), Dual Ports, Same Side
Supplier Device Package:	8-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

：

Pressure Sensors, Transducers

Pressure sensors, transducers, and other devices are used to measure or detect the pressure of gases, liquids, and solids. Pressure sensors are used in a variety of industrial and medical applications, such as automotive, aerospace, buildings, medical devices, and remote sensing. They come in a number of shapes and sizes, and they are made using different techniques. The SSCDRRN005NDAA5 is one such pressure sensor.

SSCDRRN005NDAA5 Overview

The SSCDRRN005NDAA5 is a pressure sensor made by Heptagon Micro Technology. It has a 0.25-inch size and is designed to measure pressure ranges from 0-20 bar. It has a high accuracy of ±1.5 mbar, and has an ultra-low power of 30 µW. The sensor has a stainless steel housing and is designed to withstand harsh environments.

SSCDRRN005NDAA5 Application Fields

The SSCDRRN005NDAA5 pressure sensor is used in a variety of applications. For example, it is used in automotive applications such as engine management, tire pressure monitoring, and air suspension control. The sensor is also used in medical applications, such as catheter guiding, breath analysis, and imaging. Additionally, the SSCDRRN005NDAA5 pressure sensor is used in aerospace, building control, and remote sensing applications.

SSCDRRN005NDAA5 Working Principle

The SSCDRRN005NDAA5 pressure sensor works by measuring changes in pressure on a diaphragm. The pressure is measured from two sides of the diaphragm through a bridge circuit. This bridge circuit is made up of two resistors and two capacitors. The capacitors convert the changes in voltage to changes in frequency. The frequency is then measured and used to calculate the pressure.

Conclusion

The SSCDRRN005NDAA5 pressure sensor is a small, high-accuracy device that is used for a variety of applications. It works by measuring changes in pressure on a diaphragm through a bridge circuit. The applications for this sensor are far-reaching and include automotive, medical, aerospace, building control, and remote sensing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description