ST16C1550IQ48-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UART stands for Universal Asynchronous Receiver Transmitter, and the ST16C1550IQ48-F is an example of a UART. The ST16C1550IQ48-F is a single-channel UART, meaning it allows data to be transmitted in either full-duplex or half-duplex mode, meaning the transmission can be either a one-way or a two-way communication. The ST16C1550IQ48-F is a low power consumption and low impedance 5V UART, meaning it is designed to operate with up to 5V and has a low impedance design. The UART is designed with a variety of features, including:

• 8-bit UART with an operating frequency of up to 10 MHz.
• Full-duplex and half-duplex data transmission.
• Programmable baud rate and hardware flow control.
• Serial port buffering.
• Automatic or manual flow control.
• Wake-up on CTS.
• Support for 8, 16, and 32-bit data word.
• Support for parity and data encoding.
• Support for on-chip SPI flash memory.
• Built-in oscillator.

In addition to the features listed above, the ST16C1550IQ48-F also supports four dedicated control pins: Mode 0, Mode 1, Mode 2, and Mode 3. These four control pins are designed to make it easier to configure the UART, either manually or with external logic. Mode 0 is used to select the data width of the UART (8, 16, or 32-bits), Mode 1 is used to select the mode of operation (full-duplex or half-duplex), Mode 2 is used to select the data encoding type (Parity or No Parity), and Mode 3 is used to select the baud rate of the UART.

The working principle of the ST16C1550IQ48-F UART is relatively simple. When the receiving UART receives data, it stores the received data in an internal buffer until the entire data packet has been received. Once the entire packet has been received, the UART then sends the data packet to an external device, commonly a microcontroller, using the 8-bit data word. On the other hand, when the transmitting UART sends a data packet, it stores the data in an internal buffer and then sends the data packet to the receiving UART. As the data is transmitted, the UART checks for errors, such as parity errors, and if any errors are detected, then the UART will attempt to re-transmit the data packet.

The ST16C1550IQ48-F UART is designed for use in a variety of applications such as industrial automation, automotive control, medical control, and communication applications. In industrial automation, the UART can be used to control machines, robots, and other mechanical components. In automotive control, the UART can be used to transmit data between a car’s various control units, such as the engine, transmission, and brakes. In medical control, the UART can be used to transmit data from medical monitoring devices or even from implantable medical devices. Finally, in communication applications, the UART can be used to transmit data between two or more computers, or even between two or more networks.

In summary, the ST16C1550IQ48-F is a single-channel UART with a variety of features that make it ideal for use in a variety of applications. It is capable of transmitting data at up to 10 MHz using a variety of encoding methods, including parity and data encoding. It is also capable of buffering data and supporting hardware flow control, as well as offering four dedicated control pins for easy configuration. Finally, the UART is designed for use in a variety of applications, including industrial automation, automotive control, medical control, and communication applications.

The specific data is subject to PDF, and the above content is for reference