ST16C654CQ100TR-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST16C654CQ100TR-F is a component of an integrated circuit that is part of the Universal Asynchronous Receiver Transmitter (UART) interface. UARTs are electronic devices widely used in microcontroller-based applications to transmit and receive asynchronous serial data. They are popular due to their flexibility and low power consumption.

The ST16C654CQ100TR-F is a dual-channel UART with a capacitance of 100-pin and it is compliant with the standard EIA/TIA-232, RS-232, and V.24. It has a data transfer rate of up to 250Kbps, low voltage operation and supports a wide range of configurable serial I/O signals. It also has an auto-baud detection function to ensure the correct rate of data transfer. The ST16C654CQ100TR-F also has several other features such as: a transmit/receive FIFO for improved data transfer performance, single-chip operation for reduced circuit complexity, integrated flow control for bidirectional data transfer, and a full duplex mode for two-way synchronous-data transfers. The FIFO allows data to be buffered so that it is not lost during busy or error conditions. This also reduces the number of interrupts needed to be serviced and helps maintain a consistent data transfer rate.

The working principle of this device is based on the asynchronous serial data communication protocol, whereby two or more asynchronous serial devices communicate with each other. When two devices communicate with each other, the data is sent over the serial link in packets of fixed length. The receiving end of the serial line will then decode the transmitted data and process it accordingly. The process of communication is initiated by one of the devices sending a request to the opposite device. This request is sent as a frame consisting of a start bit, data bits and a stop bit. The receiving device then respond to the request and starts sending the requested data.

The ST16C654CQ100TR-F supports multiple UART modes, including a standard mode, an extended mode, and an FIFO mode. The standard mode is designed for basic serial communication, whereas the extended mode allows for additional signals and data formats to be specified and sent. The FIFO mode is also available, which uses a buffer to store transmitted data, allowing it to be transferred quickly and efficiently. This device is also compatible with most operating systems, including Windows, Linux, and Mac OS.

Because of its features and capability, the ST16C654CQ100TR-F is widely used for various communication systems and serial data exchange in consumer electronics, industrial automation and telecommunications. It is a low-cost and reliable solution for motion control, automation systems, industrial process monitoring and telemetry, as well as embedded systems applications. The ST16C654CQ100TR-F is also used in automotive applications, where it is used to handle dynamic data exchange between various car parts, such as the engine and powertrain control modules.

Due to its high performance, flexibility and robustness, the ST16C654CQ100TR-F is an important part of the Universal Asynchronous Receiver/Transmitter interface, allowing two or more devices to communicate in an asynchronous manner quickly, securely and reliably.

The specific data is subject to PDF, and the above content is for reference