ST16C450IQ48TR-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST16C450IQ48TR-F is an interface Universal Asynchronous Receiver Transmitter (UARTs) that is based on the field logic. This device is used for communication of data and is used particularly in microprocessor, PC or PC/AT systems. The device works as a serial port bridging interface between the digital and parallel interface. The UART helps devices to communicate over an asynchronous interface.

This device is usually used on serial ports of microprocessors, PCs and P/C AT systems. It works as a bridge between the digital and parallel interface. This device is usually used in devices like modems, printers, tape drives, CD-ROM players and other peripheral digital devices. The device supports the ECP (Enhanced Capabilities Port) and SPP (Standard Parallel Port) modes of operation.

The ST16C450IQ48TR-F bus interface contains two pins for connecting to the host system or PC, of which one is the transmit pin and the other is the receive pin. When a valid parallel data is written by the main system to the device, the data is latched and transmits it in the form of serial data. The receiving pin on the device is used to receive the data transmitted by the host and it then stores the data as a sequence of parallel data, which is further processed by the microprocessor. The device contains a configurable FIFO dual-port memory to store the data. The device also has an embedded handshaking logic for the control feel between the host and the device.

The device supports many operating modes like the ECP, SPP, EPP, and the EPCM modes. The device receives data from the host in the form of a parallel bit stream and transmits it as a serial bit stream, which ensures the transmission of data over long distances as well as reducing the number of wires needed for communication. It also helps in reducing the cost of the products as compared to other serial interfaces. The device supports many configurable characteristic like baud rates, data formats, parity and data bits.

The ST16C450IQ48TR-F has the capability of supporting up to 256 different configurable baud rates and up to 16 bytes of transmit and receive data in a single frame. The device also supports 9 bit addressing, handshake signals and a configurable time out configuration. The device can also be used to transfer data over the serial port to a printer, which can help to reduce the amount of work done in post-mortem analysis. The device has an integrated code to check the accuracy of the data transferred between the host and the device and to ensure data integrity.

The ST16C450IQ48TR-F also has the capability to share port addresses, enabling data exchange between two or more UARTs. This device is capable of routing the data packets in both directions, and is also capable of supporting the flow control required for communicating during the data exchange. The device also contains an interrupt generator for generating interrupts during the data exchange. This device allows for the sharing of address pins between multiple UARTs, which reduces the number of pins required for the communication.

In conclusion, the ST16C450IQ48TR-F is a UART capable of communicating data over an asynchronous interface. The device is used to communicate data between a host and peripherals, and contains configurable characteristics to allow for different baud rates, data formats and handshake signals. The device also contains an integrated code to check the correctness and accuracy of data, and supports routing of data back and forth. The device also has an interrupt generator, which allows for a higher performance during data exchange.

The specific data is subject to PDF, and the above content is for reference