ST26C31BDR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Driver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	4/0
Duplex:	--
Data Rate:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SO
Base Part Number:	ST26C31B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST26C31BDR is a highly integrated 21 Mbps control line driver receiver and transceiver that can be used in various applications. It has an integrated high-speed digital transceiver and 3-state receivers, as well as an 8-bit microcontroller with integrated memory for command and control of the transceiver and receiver functions. The ST26C31BDR can be used to transmit and receive data and signals over long distances, up to 21 Mbps, without interference or errors.The ST26C31BDR can be used for a variety of applications such as home networking, test and measurement, medical and industrial applications, automotive and mobile applications, as well as wired and wireless communications. It provides a fast, reliable signal transmission with low power consumption while also meeting the standards set forth by the FCC and other regulatory bodies.The ST26C31BDR consists of eight device pins, including a receive enable pin and an output enable pin. The input and output data signals are transmitted over an internal data bus and the control line is used to send commands to the device and read the status. The ST26C31BDR also has an internal oscillator that can be used to set the data rate up to 21 Mbps.The working principle of the ST26C31BDR is similar to other transceivers. Data and information is sent from the device over a serial data line using the 10-pin Serial Line Interface (SLI). This data is then converted from a digital signal to an analog signal which is sent to the antenna or other devices via the wireless network. The data is then received and decoded by a receiver located in the other device or antenna. In order for the device to send and receive data, the power state must be on. When the power state is off, the device can still receive data, but cannot transmit data until the power is enabled.The ST26C31BDR also has a built-in Low-Voltage Differential Signaling (LVDS) receiver that can be used to detect and accept incoming signals from other transceiver or direct signal sources. This feature enables the device to accept signals from short and long distances, up to 21 Mbps.The ST26C31BDR is a very useful device, especially when it comes to networking and data transfer applications. It is highly integrated and low power, making it ideal for use in many applications. Its high data transfer rate, low power consumption and compatibility with many protocols make it a popular choice for many applications that require reliable data transmission.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description