ST6G3244MEBJR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ST6G3244MEBJR is a logic level translator IC, specifically designed to operate in multi-voltage systems. In the modern digital electronics industry, devices need to communicate with each other across multiple power domains, and the ST6G3244MEBJR offers a low-cost and reliable solution for this requirement. It allows communication between devices operating in different voltage levels, from one part of a system to another, without the need for expensive level shifting hardware.

In this section, we will look at the ST6G3244MEBJR pinout, application field, and working principle. This device is widely used in embedded systems, portable devices, motor control systems, and other applications due to its low power and high speed. Thus, it is an ideal choice to bridge the gap between different power domains in order to ensure communication between components.

ST6G3244MEBJR Pinout

The ST6G3244MEBJR has a 20-pin package; the pins are labelled as A0-A7, A8-A15, VCC, GND, DIR, /OE, B8-B15, B0-B7, /RST, and /LBO. The A port is the higher level translation port, while the B port is the lower level translation port. A0-A7 and A8-A15 form the 8-bit address bus, VCC and GND are the power supply pins, DIR is the direction pin, /OE is the output enable pin, and B8-B15 and B0-B7 form the 8-bit address bus respectively.

ST6G3244MEBJR Application Field

The ST6G3244MEBJR is typically used in embedded systems and industrial automation to ensure communication between components operating at different voltage levels. In these applications, the device is used as a translator to ensure bi-directional, seamless communication. This allows isolated data buses to be used with applications where multiple components are operating in different power domains.

The ST6G3244MEBJR is also used in medical, automotive, and portable device applications to bridge the gap between different voltage levels. With its ability to perform bi-directional level shifting, it is ideal for applications involving multiple components operating at various voltage levels.

ST6G3244MEBJR Working Principle

The ST6G3244MEBJR is based on the principle of unidirectional level shifting. In this, a single control pin is used to switch between two different levels — A and B — in order to allow communication between components operating at various voltages. This is made possible due to the fact that the ST6G3244MEBJR is capable of translating between different voltage levels.

When the /OE pin is low, it allows communication in the A-to-B direction. When this pin is high, communication in the B-to-A direction is enabled. The device has a low power consumption of just 0.17mW and a high switching speed of 400Ohms. It is rated for a voltage range of 4.5V-5.5V, making it ideal for embedded, industrial automation, and portable device applications.

In conclusion, the ST6G3244MEBJR is a versatile and cost-effective logic level translator IC. It is ideal for applications in which devices need to communicate across multiple power domains, as it is able to easily convert between different voltage levels. With its low power consumption, high speed, and wide voltage range, the ST6G3244MEBJR is an ideal choice for designers looking for an efficient translation solution.

The specific data is subject to PDF, and the above content is for reference