ST7ETA504

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer potentiometers are widely used in the environmental temperature control and automotive electronics, and they are designed for fine-tuning of oscillators, filters, and other analog circuits. The ST7ETA504 is an example of a trimmer potentiometer, which is a thin film, non-reversible, and 4-terminal device with a 1 mm rotational tolerance. The device not only has excellent thermal stability but also is able to produce a linear resistance variation when the adjustment mechanism is operated.

The ST7ETA504 is composed of a high-grade ceramic substrate and a thin-film conductive layer that acts as the resistance element. The trimmer consists of two main elements, namely, the ceramic substrate and the conductive element. The ceramic substrate is the base for the conductive layer which is formed in a spiral approximation. The active layer is then covered by a protective coating, an adhesive layer, and a protective film. The adhesive layer holds the protective film and the conductive element in place.

This trimmer has four terminations and a rotary actuation. The central terminations (A & B) are the main terminals, and the other two are the mechanical (rod) terminals. This device is intended to be adjusted using a screwdriver that is connected to the rod terminals, the resistance of the device being varied in a linear manner when the adjustment mechanism is operated. The ST7ETA504 has a resistance variation range from 10Ω to 500KΩ.

The ST7ETA504’s performance is superior compared to other devices due to its high resistance, low thermal coefficient of resistance, and better mechanical strength. In addition, due to the thin-film construction, the device does not suffer from contact oxidation, thus providing a stable resistance value over time. When compared to other potentiometers, the ST7ETA504 has a much higher accuracy, higher power handling capabilities, and better long-term stability.

The working principle of the ST7ETA504 trimmer potentiometer is relatively simple. When the adjustment mechanism is operated (i.e. by rotating the shaft), the resistance between the central connections A & B is varied in a linear manner. This variation corresponds to a linear change in voltage at the two terminals of the device, thus allowing precise adjustment. The output voltage is related to the device’s total resistance (Rt), the number of turns (n) of the adjustment mechanism, and the resistance per turn (Rp) as follows: Vout = Rt/n × Rp.

In conclusion, the ST7ETA504 is a reliable trimmer potentiometer designed for use in the environmental temperature control and automotive electronics. It is suitable for fine-tuning of oscillators, filters, and other analog circuits due to its small size, high accuracy, and robust construction. The device has a resistance range from 10Ω to 500KΩ and a simple operating principle - when the adjustment mechanism is operated, the resistance between the central connections is varied in a linear manner.

The specific data is subject to PDF, and the above content is for reference