STBB3NJR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

STBB3NJR is a DC/DC converter that is specifically designed for automotive applications. This component is primarily used for motor control in vehicle interior applications and is certified for ISO/TS 16949: 2009. It is one of the many voltage regulators for DC/DC switching regulators designed for PMIC; some of which include LTC3785, ZL6201, SN74S04, and MIC2075.

The STBB3NJR is a low-side, non-isolated DC/DC converter that comes in a compact SOP package and requires a minimum amount of external components. It includes two current-sensing resistors that use the voltage drop to generate an internal current sense signal that is compared to the reference voltage. This reference voltage is generated by two integrated driver transistors that power the converter.

The STBB3NJR operates in three stages. During the first stage called boost, the converter is operating in an open-loop configuration with a low output voltage or in a regulated mode with a single PWM. The pulse width modulation frequency is determined by a voltage reference, which is adjusted by an external resistor. During the second stage, called "linear," the voltage output ramps up to a regulated level and the PWM is turned off. At the end of this stage, the control circuit switches back to the PWM mode and the third stage, called "regulation," occurs. At this point, the PWM duty cycle is adjusted to maintain the output voltage at the desired level.

In addition to these three phases, STBB3NJR also includes a slew rate control, which is used to limit the highest frequency ripple on the output voltage. This feature is important in applications where the output voltage must remain stable over a wide range of loads. The converter can also be programmed with a selectable PWM frequency and supply spread.

The STBB3NJR can operate in a wide temperature range and offers short circuit, overload and current limit protection, as well as overvoltage and undervoltage protection. This component also provides a very fast load response and accurate regulation. The STBB3NJR is particularly beneficial in automotive applications as it offers a robust and reliable solution that provides high efficiency, low power losses, and no EMI or RFI.

STBB3NJR is a versatile and reliable DC/DC converter that is designed specifically for automotive applications. With its integrated components, it can be used to provide precise voltage regulation, even under rapidly changing load conditions. This component is robust, reliable and efficient, making it an ideal choice for a variety of automotive electric and electronic applications.

The specific data is subject to PDF, and the above content is for reference