STM8S001J3M3TR

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The STM8S001J3M3TR 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. It is referred to as low-density device in the STM8S microcontroller family reference manual (RM0016). The STM8S001J3 device provides the following benefits: performance, robustness and reduced system cost. Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset. Full documentation is offered as well as a wide choice of development tools.

2. Core

    1. 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline

    2. Extended instruction set

3. Memories

    1. Program memory: 8 Kbytes Flash memory; data retention 20 years at 55 °C after 100 cycles

    2. RAM: 1 Kbyte

    3. Data memory: 128-byte true data EEPROM; endurance up to 100 k write/erase cycles

4. Clock, reset and supply management

    1. 2.95 V to 5.5 V operating voltage

    2. Flexible clock control, 3 master clock sources

        – External clock input

        – Internal, user-trimmable 16 MHz RC

        – Internal low-power 128 kHz RC

    3. Clock security system with clock monitor

    4. Power management

        – Low-power modes (wait, active-halt, halt)

        – Switch-off peripheral clocks individually

        – Permanently active, low-consumption power-on and power-down reset

5. Interrupt management

    1. Nested interrupt controller with 32 interrupts

    2. Up to 5 external interrupts

6. Timers

    1. Advanced control timer: 16-bit, 2 CAPCOM channels, 2 outputs, dead-time insertion and flexible synchronization

    2. 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)

    3. 8-bit basic timer with 8-bit prescaler

    4. Auto wakeup timer

    5. Window and independent watchdog timers

7. Communications interfaces

    1. UART, SmartCard, IrDA, LIN master mode

    2. SPI unidirectional interface up to 8 Mbit/s

    3. I2C interface up to 400 Kbit/s

8. Analog to digital converter (ADC)

    1. 10-bit ADC, ± 1 LSB ADC with up to 3 multiplexed channels, scan mode and analog watchdog

    2. Internal reference voltage measurement

9. I/Os

    1. Up to 5 I/Os including 4 high-sink outputs

    2. Highly robust I/O design, immune against current injection

10. Development support

    1. Embedded single-wire interface module (SWIM) or fast on-chip programming and nonintrusive debugging

11. pin description

12. package information