STWD100NYWY3F Integrated Circuits (ICs)

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

The STWD100NYWY3F watchdog timer circuit is an independent device that can prevent certain types of hardware errors (for example, unresponsive peripherals and bus contention) or software errors (for example, wrong code jumps and code stuck in loops). ) System failure caused by the STWD100 watchdog timer has an input WDI and an output WDO. This input is used to periodically clear the internal watchdog timer within the specified time-out period twd. When the system is running normally, it will periodically switch the watchdog input WDI. If the system fails, the watchdog timer will not be reset, the system will generate an alarm, and the watchdog output WDO will be asserted. The STWD100 circuit also has an enable pin EN, which can enable or disable the watchdog function. The EN pin is connected to the internal pull-down resistor. If the EN pin is left floating, the device is enabled.

2. Feature

    1. Current consumption is typically 13 µA.

    2. The available watchdog timeout periods are 3.4 ms, 6.3 ms, 102 ms and 1.6 s

    3. Chip enable input

    4. Open drain or push-pull WDO output

    5. Operating temperature range: –40 to 125 °C

    6. Package: SOT23-5 and SC70-5 (SOT323-5)

    7. ESD performance

        - HBM: 2000 volts

        - CDM: 1000 volts

    8. The car is qualified

3. Application

    1. Telecommunications

    2. Alarm system

    3. Industrial equipment

    4. Network

    5. Medical equipment

    6. UPS (Uninterruptible Power Supply)

    7. Car

4. Pin configuration

5. Pin description

6. Package overview