SUTS62405-G

Current - Output (Max):	1.2A
Supplier Device Package:	--
Size / Dimension:	1.48" L x 0.36" W x 1.04" H (37.6mm x 9.2mm x 26.4mm)
Package / Case:	7-SIP Module
Mounting Type:	Through Hole
Efficiency:	81%
Operating Temperature:	-40°C ~ 85°C (With Derating)
Features:	--
Applications:	ITE (Commercial)
Voltage - Isolation:	500V
Power (Watts):	6W
Series:	*
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are widely used in electronic devices, for many different applications. The SUTS62405-G is no exception. This series of DC to DC converters is designed to provide robust electrical isolation in a wide variety of applications.The SUTS62405-G series of DC to DC converters is designed for up to 500 V input to output isolation and provides continuous output current of up to 5 amps. It is designed for use in applications that require reliable electrical isolation, such as in powering high voltage electronics from low voltage power sources. The SUTS62405-G is also used in situations where noise immunity is required, such as in the medical device and telecommunications industries.The SUTS62405-G can operate from either a DC to DC or AC to DC input, making it an ideal choice for applications in different industries. It is a high efficiency switch mode power supply module with integrated transformer and provides very low ripple and noise. The SUTS62405-G has overvoltage protection, over current protection, short circuit protection, and thermal protection to keep the device operating safely and reliably.The SUTS62405-G is based on a non-isolated topology, and uses a full bridge converter with an active clamp on the low-side to achieve low losses and a high-frequency operating range. The SUTS62405-G also incorporates a PFC stage, which allows for higher efficiency than a typical flyback design.The active clamp technique is used to reduce the losses associated with the reverse recovery of the body diode, resulting in a lower power dissipation and a higher efficiency for the unit. The active clamp also increases the operating frequency, reducing the size, cost, and complexity of the components. This makes the SUTS62405-G an ideal choice for applications where a small form factor, low cost, and high efficiency are required.The SUTS62405-G works in a pulse width modulation (PWM) mode, with a frequency of up to 400 KHz. The switch on time is adjustable, with some of the models allowing an adjustable duty cycle range. The PWM, used to control the output voltage, reduces the current ripple in the system, allowing for better regulation and increased output stability.The SUTS62405-G provides constant current, constant voltage, and CV/CC convergence charging modes. In addition, the series offers two insulation distances, 2500Vrms or 3000Vrms, for extra protection and reduced EM interference.The SUTS62405-G is designed to be used in a variety of applications, from consumer electronics, to automotive, industrial, and communication applications. Its small size and high efficiency make it well-suited to powering any electronic device from a low voltage source, with reliable electrical isolation. Its wide range of features and adjustable parameters also make it an ideal choice for any application that requires robust electrical isolation, noise immunity, and efficient power conversion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description