SY10E111LEJZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SY10E111LEJZ is a non-inverting buffer/driver component from Texas Instruments (TI) that is designed to provide a high-frequency level of clock signals in a variety of digital applications. This component is often used in systems requiring multiple and dissimilar clock signals as it is capable of providing clean, reliable signals that match and originate from the same oscillator. It is especially useful in applications where a digital system clock must be synchronized with other digital systems, in order to allow data communications and operations to occur in real time.

The SY10E111LEJZ component is broadly used in digital systems, and is a common component of the clock driver family. It is based on the popular buffered PLL design, which provides deterministic jitter performance with an output noise level of -125 dBc/Hz at 1 MHz and -150 dBc/Hz at 100 MHz. The component enables powerful generated clock signals with an output frequency of up to 800 MHz, making it ideal for applications that require the most reliable, high-frequency clock signals levels.

The SY10E111LEJZ supports 3 different operating modes: low power, low power with automatic shutdown, and low power with manual shutdown. In its low-power mode, the component draws 6 mA when transmitting frequencies lower than 400 MHz, allowing for a low-power operation that still outputs high-quality clock signals. When the automatic shutdown mode is enabled, the component will shut down to a zero-power state when input frequencies drop below a preset level.

The SY10E111LEJZ is more than just a high-frequency clock buffer; its operating principle allows for a variety of synchronization and data transfer techniques. The component distributes clock signals to multiple system components, allowing them to"talk" to each other in unison. This allows digital systems to operate faster and more reliably, whilst providing protection against glitching and data errors.

Moreover, it is also capable of working in tandem with phase-locked loop (PLL) and delay-locked loop (DLL) components, allowing for clock rates to be dynamically adjusted depending on the system requirements. This ensures that each part of the system operates at the optimum frequency while also reducing power consumption.

The SY10E111LEJZ is also equipped with a built-in phase detector, which allows for measurements to be taken of any differences in clock frequency and phase between the input and output clocks. These measurements can be used to accurately adjust the phase and amplitude of the generated clock signals, ensuring that all the components of the system are running in perfect sync.

In conclusion, the SY10E111LEJZ from TI is a highly versatile component capable of providing stable high-frequency clock signals in a variety of digital applications. With features such as PLL and DLL support as well as a built-in phase detector, this component can easily be used to synchronize multiple digital systems. This makes the SY10E111LEJZ an essential tool for creating advanced digital systems with reliable timing and errorless data communications.

The specific data is subject to PDF, and the above content is for reference