SY10H352JZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SY10H352JZ is a logic device from Toshiba Electronics that belongs to the family of Logic - Translators, Level Shifters. It is a 3-state non-inverting driver/receiver with TTL-compatible input and output. The feature that distinguishes this device from others is its use of C-MOS outputs, which can provide a high impedance state when the output strobes are low. Thus, the outputs of the SY10H352JZ can be controlled by driving an input signal and then releasing it. As a result, the output will enter a high-impedance mode and remain there, regardless of the logic state at the inputs.

SY10H352JZ is ideal for use in applications where logic levels needs to be shifted from one voltage domain to another, such as level translation circuits for interfacing between 3.3V and 5V devices, due to its built-in capability to work with 3.3V and 5V input levels. Its outputs can be used in either a push-pull or open-drain configuration. The push-pull configuration is more suitable for open-collector applications since it provides both pull-up and pull-down capability at the same time. In open-drain configuration, the outputs can be used in combination with an external pull-up resistor to attain an active-high logic level, while the low logic level can either be achieved with an external pull-down resistor or by keeping the input in an open state.

The working principle of the SY10H352JZ is based on the difference between logic states of the input signals and the selected C-MOS output mode. When the logic input is 0, the device forces its output to 0 as long as C-MOS output mode selection is kept low. When the input is 1, the device will leave its output in high-impedance state if the C-MOS output mode is selected high. The device will also keep its output in high-impedance state when the input is in an open state since the logic input is not detected in the absence of voltage.

The SY10H352JZ has a wide range of applications since it provides improved input noise protection and higher common-mode rejection ratios with its tolerant input levels and outputs. It can be used for applications such as level translation for interfacing between 3.3V and 5V devices, creating bidirectional signal paths, analog switching, signal conditioning, and buffer applications. The device is also used in communication and signal display applications, such as LED and LCD display drivers, and driving signal isolators and optocouplers.

The specific data is subject to PDF, and the above content is for reference