SZMMBZ5225BLT1G

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	3V
Tolerance:	±5%
Power - Max:	225mW
Impedance (Max) (Zzt):	29 Ohms
Current - Reverse Leakage @ Vr:	50µA @ 1V
Voltage - Forward (Vf) (Max) @ If:	900mV @ 10mA
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SOT-23-3 (TO-236)
Base Part Number:	MMBZ5225B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SZMMBZ5225BLT1G is an N-channel MOSFET transistor, and is part of semiconductor manufacturer ON Semiconductor’s portfolio of discrete Power MOSFETs. The SZMMBZ5225BLT1G is a single Zener diode. Zener diodes are a type of diode that, unlike a regular diode, can conduct current in the reverse direction when the voltage applied to it is greater than its reverse breakdown voltage.

Application Fields of SZMMBZ5225BLT1G

The SZMMBZ5225BLT1G is a particularly powerful and reliable Zener diode. Its breakdown voltage is 35V and its maximum dynamic resistance is 1.15Ohm. It is widely used in a variety of applications, such as in transistors, switches, voltage regulators, and voltage converters. It can also be used in switching applications, such as low-voltage generators or even to drive high-power LEDs with a pulse width modulation circuit.

Power Supplies

One of the most common applications of the SZMMBZ5225BLT1G is in power supplies. A Zener diode is essentially a voltage regulator, and can be used to provide a stable voltage in order to protect downstream components from excessive voltage peaks. By connecting the SZMMBZ5225BLT1G in series with a load and power source, the component can limit the accessing voltage of the load if the power source were to ever surge, allowing designers to design simpler power supplies with a greater level of safety.

DC Drive Circuits

The SZMMBZ5225BLT1G is also ideal for use in DC drive circuits. DC drive circuits are designed to move an inductive-resistive load at a certain speed and without oscillations, and the current flowing through the resistive component is regulated by the SZMMBZ5225BLT1G. By using the SZMMBZ5225BLT1G, designers can ensure that the current through the resistive component doesn’t exceed the diode’s breakdown voltage, which is 35V.

Relay Circuits

The SZMMBZ5225BLT1G is also ideal for use in relay circuits. By connecting the SZMMBZ5225BLT1G in parallel with the relay coil, designers can limit the current that flows through the coil when the relay is activated, which helps to prolong the life of the coil and reduce the amount of power that is used by the relay.

Working Principle of SZMMBZ5225BLT1G

A Zener diode is an electronic component that allows current to flow in the reverse direction, once the voltage applied to it exceeds its breakdown voltage. The SZMMBZ5225BLT1G’s breakdown voltage is 35V, and it has a maximum dynamic resistance of 1.15Ohm. The current-voltage characteristics of a Zener diode can be described as follows: when the voltage across the diode is below its breakdown voltage, the Zener diode does not conduct current, and it acts as an open circuit. When the voltage exceeds the breakdown voltage, current begins to flow through the diode, and the voltage across the diode remains fairly constant at a value equal to the breakdown voltage. This property of the Zener diode is known as the Zener Effect, and is the basis of its functionality. When using the SZMMBZ5225BLT1G in a power supply, the diode is connected in series with the load and the power source. When the power source voltage exceeds the diode\'s breakdown voltage, the current flows through the diode instead of through the load, preventing the voltage at the load from reaching its maximum allowable level. In DC drive circuits, the SZMMBZ5225BLT1G is used to regulate the current that flows through the resistive component of the circuit. By limiting the current that flows through the resistive component, the SZMMBZ5225BLT1G ensures that the current doesn’t exceed the diode\'s breakdown voltage and thus does not cause any damage to the circuit. When used in relay circuits, the SZMMBZ5225BLT1G is connected in parallel with the relay coil to limit the current that flows through the coil when the relay is activated. This reduces the amount of power that is used by the relay and helps to prolong its life.

Conclusion

The SZMMBZ5225BLT1G is a powerful and reliable Zener diode that has many uses in a variety of applications. It is used in power supplies to protect downstream components from excessive voltage peaks, in DC drive circuits to regulate the current that flows through the resistive component, and in relay circuits to reduce the amount of power that is used by the relay. The SZMMBZ5225BLT1G’s breakdown voltage is 35V and its maximum dynamic resistance is 1.15Ohm.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description