SZMMSZ33ET1G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Zener diodes are widely used for voltage regulation in many electrical and electronic circuits. These circuits allow the forward voltage applied to them to fall below a certain level, known as the Zener voltage. The SZMMSZ33ET1G is a single Zener diode widely used for this purpose.

The SZMMSZ33ET1G Zener diode is a single diode that has reverse breakdown capabilities. This means that, when the reverse voltage applied to it reaches the Zener voltage level, the voltage will stay constant at that level until the load current is changed. This type of voltage regulation allows circuits to be designed with specific reference voltages.

The SZMMSZ33ET1G is also known as an avalanche diode, as under certain conditions, currents can pass through it in both directions via an avalanche of free electrons. This is due to the diode’s semiconductor materials, which are shock resistant and can handle moderately high-voltage surges.

The SZMMSZ33ET1G has a nominal Zener voltage of 3.3 volts and a power rating of 500 mW. It also has a reverse breakdown voltage, which is the same as the Zener voltage. This diode is also able to handle maximum surge currents up to 6o watts and works at operating temperatures from -55°C to +105°C.

Due to its small size, the SZMMSZ33ET1G is widely used in a range of electronic circuits. These include switching power supplies, motor controls, TV sets, automotive electronics, and other types of small electronic circuits where a precise voltage level or a constant voltage reference is required.

The working principle of the SZMMSZ33ET1G is relatively simple. When a forward voltage is applied to it, the diode will allow the current to pass in one direction only. This is known as the forward bias. When the forward voltage is removed, and a reverse voltage is applied, the diode will act as an open circuit and will not allow the current to pass through.

If the reverse voltage is increased to the level of the Zener voltage, the semiconductor material of the diode will break down and the current will be able to pass through in both directions. This is known as the Zener breakdown, which is what allows the diode to act as a voltage regulator.

As the reverse voltage increases towards the Zener voltage, the current passing through the diode will also increase. When the voltage applied reaches the same level as the Zener voltage, the current will be constant at that level until the load current changes. This is known as the Zener effect, and it is the phenomenon used to stabilize the voltage output in electronic circuits.

In short, the SZMMSZ33ET1G is a single Zener diode with a Zener voltage of 3.3 volts and a reverse breakdown voltage of 3.3 volts. It is used in many electronic circuits to provide a stable voltage reference, and its working principle is based on the Zener breakdown effect. It is a robust and reliable component, and its low cost makes it a popular choice for voltage regulation.

The specific data is subject to PDF, and the above content is for reference