T1010H-6T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductor devices that contain three sections: a gate, main terminal 1 (MT1), and main terminal 2 (MT2), as well as several additional electrodes. It is a three-terminal semiconductor switching device often used for controlling power in AC applications. This article will focus on the T1010H-6T application field and working principle.

The T1010H-6T is a four-quadrant TRIAC based on the earlier two-quadrant TRIAC in the market. It is an ideal choice to use as a bidirectional switch in a broad range of applications, such as motor control, lighting control, and energy saving. The advantages of the T1010H-6T are its fast switching times, lower power dissipation, and higher current ratings, giving it superior performance in comparison to other TRIACs.

The T1010H-6T TRIAC is designed to work possibly in all four-quadrants. Depending on the MT1 and MT2 voltage polarity, the voltage is divided in four different configurations, specifically Quadrant I (positive voltage in MT1 and MT2), Quadrant II (positive voltage in MT1 and negative in MT2), Quadrant III (negative voltage in MT1 and MT2), and Quadrant IV (negative voltage in MT1 and positive in MT2). The gate current is altered and then the switching time of the device is increased.

The T1010H-6T works in a unique manner which makes it advantageous over other TRIACs. Instead of using the usual avalanche breakdown principle, it employs a "junction breakdown" phenomenon which occurs when certain electrical conditions are met. The breakdown voltage of the T101O-6T is 0.7V, which is much lower than the avalanche breakdown voltage of other TRIACs.

The T1010H-6T supports various control capabilities such as phase control, light dimming, energy saving, and motor control. For phase control applications, the TRIAC can be steered by a direct or reverse current and then turned on or off in diverse ways. This feature provides higher flexibility and precise control of the electrical process.

The T1010H-6T is most appropriate for controlling light intensity. When the TRIAC is triggered off, the current cycle will begin at the zero-crossing region. The level of dimming depends on the firing angle and amount of current passing through the device at a given time. The user can regulate the light intensity in suitable degree.

The T1010H-6T can be used in energy saving applications. Its high speed capability allows the POWER TRIAC to act as a switch and it will open or close the electricity pathway quickly and accurately. The T1010H-6T also has a typically low on-state voltage drop. This leads to more efficient power utilization and helps increase energy efficiency in devices.

In motor control applications, the T1010H-6T acts as a switch which helps to control the voltage and current flow. It can produce a variable speed and direction control in AC motors. The device utilizes a low-level current to control a high-level current to ensure an accurate and exact setup. The TRIAC can also be programmed to switch at a given time.

To summarize, the T1010H-6T is a modern TRIAC which has specific features, allowing it to be used in many applications. It has a low voltage breakdown and enables precise accuracy in motor control, energy saving, and light dimming operations. The T1010H-6T is one of the best options in the market for its performance and reasonable prices.

The specific data is subject to PDF, and the above content is for reference