T405-600B-TR Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are components that use semiconductor materials, usually silicon, to control electrical current. The TRIAC, a Thyristor with three electrodes, is especially well suited for controlling alternating current. Within the class of TRIACs, the T405-600B-TR is used in a variety of applications and has a simple but effective design.

One of the most common applications for a T405-600B-TR is in a dimmer switch. These switches are typically used to control the brightness of lighting fixtures, meaning they need to regulate the current running through the circuit. The TRIAC works by sending short pulses of current through the semiconductor material to the load, which switches the load on and off quickly enough that it yields an average voltage which controls the brightness. The average voltage is regulated by changing the circuit’s firing angle, which means that the amount of time current is being sent to the load is changed. This design makes a T405-600B-TR particularly suited to dimmers.

The T405-600B-TR also has one of the highest surge ratings among TRIACs, making it especially suited for switching applications where high current is involved. This is why the T405-600B-TR is the go-to TRIAC for motor control and many other large load switching applications. This is because the TRIAC can withstand high power without a significant decrease in performance, and is also able to switch quickly, meaning the current can be quickly adjusted and turned on and off as needed.

The working principle behind the T405-600B-TR is relatively simple. The TRIAC is made up of two main components, the gate, and the main terminal (MT). The gate is a PNPN structure with three terminals, the gate control (GCT), the main control (MCT) and the MT. A current flowing into the GCT terminal causes the TRIAC to switch on and off quickly. When current passes through the MT, it triggers the TRIAC, allowing it to close the current circuit. This is why it’s important that the current going through the GCT and MT be in-phase, as this avoids triggering the TRIAC. The speed of switching depends on the resistance of the circuit, as a larger resistance will cause the TRIAC to switch more slowly.

The T405-600B-TR is a versatile TRIAC that offers a standard and reliable solution for a variety of applications. It can be used for dimmers, motor controls and large load switching, making it a great choice for any project that requires reliable and efficient control of electrical current.

The specific data is subject to PDF, and the above content is for reference