Allicdata Part #: | T485F-ND |
Manufacturer Part#: |
T485F |
Price: | $ 44.49 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Sensata-Crydom |
Short Description: | MODULE POWER |
More Detail: | Bridge Rectifier Three Phase Standard |
DataSheet: | T485F Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 40.03650 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Not For New Designs |
Diode Type: | Three Phase |
Technology: | Standard |
Operating Temperature: | -- |
Mounting Type: | -- |
Package / Case: | Module |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes are components that conduct current in only one direction. Bridge rectifiers are devices that use four or more diodes to convert alternating current (AC) to direct current (DC). The T485F is a type of bridge rectifier, made from four cylindrical-shaped diodes that are connected in a bridge circuit.
The T485F is designed for applications requiring a single-phase, full-wave rectification. It offers the advantage of lower cost compared to other types of rectifiers, due to its only four diodes. The T485F can be used for low- to medium-level applications that require a low surge current.
The T485F is suitable for several applications including AC to DC conversion, AC/DC filtering, and voltage regulation. In addition, it can be used as a motor speed regulator, to convert signal voltage, or to produce DC current in AC circuits.
The T485F works by allowing the positive and negative alternations of the AC signal to pass through a single circuit of four diodes. This causes the AC signal to be converted into a DC signal. The output is then smoothed by capacitor filtering to ensure a steady DC output.
The T485F is composed of four red cylindrical cylinders that are soldered to a pair of terminals. These terminals connect the diodes in a bridge circuit configuration. When an AC signal is applied to the terminals, the current alternates through the diodes in a bridge arrangement, and is rectified into DC.
When an AC signal is applied to an external load, the resulting current is rectified by the T485F. The diodes allow current to pass from the positive to the negative terminal, and from the negative to the positive terminal. This creates a unidirectional current that is sent to the external load.
The T485F is a typically used for low- to medium-level applications that require a low surge current. It offers the advantage of lower cost compared to other rectifiers, and is suitable for a number of applications including AC to DC conversion, AC/DC filtering, and voltage regulation. In addition, it can be used as a motor speed regulator, to convert signal voltage, or to produce DC current in AC circuits.
The specific data is subject to PDF, and the above content is for reference
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...