T496B106K006ATE3K5 Capacitors

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	Fail Safe with Built-in Fuse
Ratings:	COTS
Manufacturer Size Code:	B
Lead Spacing:	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.138" L x 0.110" W (3.50mm x 2.80mm)
Package / Case:	1411 (3528 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	2000 Hrs @ 85°C
Series:	T496
ESR (Equivalent Series Resistance):	3.5 Ohm
Type:	Molded
Voltage - Rated:	6.3V
Tolerance:	±10%
Capacitance:	10µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum Capacitors

Tantalum capacitors are a type of electrolytic capacitor that use tantalum chips as the anode of a capacitor. The basic structure of a tantalum capacitor consists of a “hot” lead to which the anode is attached, a separator, a dielectric layer between the anode and the cathode and the cathode itself. A number of tantalum capacitors use manganese dioxide as an electrolyte, wrapped in an insulating foil, to connect the anode and cathode layers of the capacitor. Tantalum capacitors, due to their size and high capacitance, are widely used in electronic circuits such as consumer electronics, computers, telecommunications equipment and aerospace technology. In some cases, tantalum capacitors can provide significant savings in cost and performance over other components.

T496B106K006ATE3K5 Application Field and Working Principle

The T496B106K006ATE3K5 is one of the most common types of tantalum capacitors. This component is most commonly used in consumer electronics and telecommunications applications, where a reliable and convenient capacitor is required. The T496B106K006ATE3K5 features an ESR rating of 0.652mOhms, a capacitance of 10uF and thermal shock of 20 to 200°C. The component is a non-polarized design and features a polypropylene dielectric. The component also offers a low self-discharge rate with low dielectric absorption. The T496B106K006ATE3K5 operates primarily through a principle known as “capacitor leakage”. In this principles, the charge of the capacitor is able to pass through the dielectric material between the anode and the cathode, and then is discharged back through the dielectric material, allowing for a low level self-discharge rate. Additionally, the component also has a low self-inductance, enabling a good electrical connection.

Advantages and Disadvantages of Tantalum Capacitors

Tantalum capacitors have several advantages over other electrolytic capacitors. The most notable of these advantages is their very low ESR, which can allow for the construction of much smaller circuits with the same level of performance. Additionally, tantalum capacitors are also extremely reliable and can withstand high temperatures, which make them a great choice for applications that require extended high temperature operation.On the other hand, tantalum capacitors also have several drawbacks. For instance, the material cost of tantalum is high, resulting in much higher component prices when compared to other types of electrolytic capacitors. Additionally, they are also prone to deterioration when exposed to excessive heat, and their often smaller size can make them difficult to install and replace in some applications.

Conclusion

Tantalum capacitors, such as the T496B106K006ATE3K5, have a number of advantages over other components, thanks to their low ESR, small size, and excellent temperature resistance. However, they also have some drawbacks, such as their high cost and difficulty of installation. For applications where size and performance are critical, however, tantalum capacitors are often the ideal choice.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description