Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

T507087074AQ Application Field and Working Principle

A silicon-controlled rectifier (SCR) is a component that is commonly known as Thyristors, which are classified as a type of semiconductor that is typically used to control electric power by varying the voltage and current of an AC/DC power circuit. This SCR is a four-layer, unidirectional switch that can only be triggered into conduction mode once it is turned on, or forward biased, by applying the proper positive battery voltage to it. This regulated component is most often used to create time- and voltage-controlled rectification circuits, but the uses of T507087074AQ SCRs extend far beyond the family of controlling electric power.

Application Fields

T507087074AQ is widely used across industries and applications due to its capabilities in regulating and controlling electric power. In particular, this SCR component is often used in circuit protection and automotive ignition systems where constant current is required, such as in electronics, electric motor control and switching power supplies. A SCR can also be used as a voltage regulator, and is a common component in lighting, home appliance or industrial automation systems and in power converters.

In telecommunication, T507087074AQ SCRs are also useful for interfacing with digital systems since they can be used to switch between difference logic states. Other applications utilise SCR for controlling the speed and torque of AC motors.

Working Principles

When the forward bias requirements of the SCR are met and the anode is positive with respect to the cathode, a very small electric current (small enough to be considered negligible) begins to flow as a result of the majority carriers drifting between the two junctions between the N and P layers. The distinct mode of forward conduction is due to an imbalance of majority carriers caused by the presence of electrons on the anode and holes on the cathode.

Once the T507087074AQ SCR is triggered, a better connection is established, allowing majority carriers to flow in reverse direction and then increase the forward current. The voltage across the SCR will remain stable during forward operation, unless either the current limit of the SCR is exceeded or the temperature goes beyond its sustainable operating temperature, thus preventing further conduction.

At this point, the T507087074AQ SCR will initiate reverse-conducting because reverse bias is applied, and hence current will stop flowing from the source to the load. The obstruction of the current flow is due to the depletion layer width increasing at both junctions, since the electrons and holes can no longer reach the depletion field region.

In conclusion, T507087074AQ SCR is a four-layer, unidirectional switch that is primarily used to control electric power. Its application fields range from circuit protection, automotive ignition to power converters and speed/torque control of AC motors. Its working principle revolves around switching the electric current depending on the voltage applied, and it has their own unique characteristics when asked to operate on different modes.

The specific data is subject to PDF, and the above content is for reference