T5071440B4AQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs, or silicon controlled rectifiers, are an important type of semiconductor device. The SCR T5071440B4AQ is widely used in the electronics and electrical engineering fields. It is employed in a variety of applications, and is highly reliable. This article will discuss the application field and working principle of the SCR T5071440B4AQ.

The T5071440B4AQ is an SCR with a peak repetitive reverse voltage of 400V, an on-state current of 40A, and a surge overload current of 70A. It has high-temperature soldered terminals, and a titanium nitride gate oxide. This device is ideal for high-voltage and current-switching applications, such as power converters, frequency inverters, AC and DC motor drives, and DC-DC converters. It is also suitable for industrial applications, including rectified load-lighting, and pulse-width modulation control circuits.

The working principle of the T5071440B4AQ is based on a four-layer diode structure. It consists of two P layers and two N layers. The two P layers form the anode; the two N layers form the cathode. When the anode voltage is greater than the breakdown voltage, current flows through the device. This is known as the “on” state. When the anode voltage is decreased below the breakdown voltage, current stops flowing through the device. This is known as the “off” state.

The T5071440B4AQ can be triggered, silenced, and reset quickly. This is done with the aid of a gate electrode placed between the two P layers and connected to ground. When a positive voltage is applied to the gate, it allows the device to temporarily switch “on.” When the gate voltage is removed, the device switches “off.” The device can also be turned “off” by decreasing the anode voltage to below the holding voltage.

The T5071440B4AQ is also equipped with a heat sink, which aids in heat dissipation and improves the device’s thermal performance. The heat sink facilitates the proper operation of the device, and also provides protection against damage due to overload currents.

In summary, the T5071440B4AQ is an SCR with a peak repetitive reverse voltage of 400V, an on-state current of 40A, and a surge overload current of 70A. It is used for high-voltage and current-switching applications, and is capable of being triggered, silenced, and reset quickly. It is also equipped with a heat sink for thermal performance and protection against overload currents. This device is reliable and widely used in applications such as power converters, frequency inverters, AC and DC motor drives, and DC-DC converters.

The specific data is subject to PDF, and the above content is for reference