T510X337M010ATE035 Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A tantalum capacitor is a type of electrolytic capacitor, a component of electronic circuits. It consists of a pellet of tantalum metal as an anode, covered by an insulating oxide layer that forms the dielectric, surrounded by liquid or solid electrolyte as a cathode. Most tantalum capacitors are polarized, meaning they can be installed correctly in only one orientation, and incorrect installation may lead to an immediate short or long-term failure depending on the type of capacitor.

T510X337M010ATE035 Application Field and Working Principle

Tantalum capacitors are most commonly used in timing and filtering applications in high-frequency analog circuits, primarily in smartphones and similar mobile devices, due to the small size and low cost of the parts. The main application for these parts is the filtering out of tiny spikes on the power supply lines, which can cause problems with the semiconductors within the device. As a result, these capacitors often serve as the primary active filtering components within the device\'s power management circuit.

The T510X337M010ATE035 combines a 10uF tantalum capacitor in a conventional 28-pin LGA (land grid array) package with a 3.3V voltage rating. The capacitor is designed in a very small form factor and is able to offer very low ESL (equivalent series inductance) and ESR (equivalent series resistance) values, which is beneficial for reducing circuit noise and unwanted voltage ripple. Additionally, the part features low leakage and high ripple current ratings.

The working principle of the T510X337M010ATE035 is one of capacitive processes. When a voltage is applied to the capacitor, a certain amount of charge is stored and pushed to the electrodes, creating a capacitance. The capacitance of a capacitor can be determined by its geometry, as well as its dielectric properties. The dielectric is the material between the capacitor\'s plates, and determines the amount of charge that can be held with a given voltage. In the case of the T510X337M010ATE035, the dielectric material is tantalum pentoxide, which has superior capacitance and voltage characteristics.

The structure of the T510X337M010ATE035 also allows it to offer high ripple current ratings in a very small size. The solid electrolyte creates a relatively large surface area for current dissipation, as well as fast charging during alternating polarity pulses, which reduces the time needed to switch from one power supply state to another. This makes the part especially suitable for use in high-frequency switching voltage regulators and DSPs, as well as general-purpose microcontroller applications.

As with all other types of capacitors, the T510X337M010ATE035 can suffer from performance degradation due to its age and chosen environment. It is important to keep the capacitor installed in a dry and low-temperature environment, as well as choosing the right voltage rating to prevent overvoltage damage.

The specific data is subject to PDF, and the above content is for reference