T620103004DN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The T620103004DN is a three-phase thyristor module designed for wide range AC/DC and DC/DC applications, such as rectifier, inverter and chopper applications. This device is designed for high switching frequencies and high current applications.

This 3-phase Thyristor Module is capable of handling up to 600 Amperes of RMS current, can operate at temperatures ranging from -40°C to 120°C, and is rated for DC Voltage of 800V. It comes in a TO-254AA package, which is a common surface mount package size.

Thyristors are electrically-controlled, non-mechanical power semiconductor switching devices. They are also known as silicon control rectifiers (SCRs). The thyristor consists of four semiconductor layers, namely an anode and a cathode, coupled together by a p-n junction. When a voltage is applied to the anode, a current begins to flow until it reaches a certain threshold level, which is determined by the gate-cathode voltage. At this point, the gate-cathode voltage biases the gate-cathode junction and switches the device from its low current state to its high current state. The thyristors can then be switched on and off by controlling the gate-cathode voltage.

The T620103004DN is a three-phase module which is designed for high frequency and high current applications. The module consists of three independent thyristor blocks each with an anode and a cathode and a gate-cathode, with each anode connected to a common anode port. The thyristors are insulated from each other and are connected to the dc output port by two separate low-inductance connection busbars. The gates of the thyristors are all wired in parallel, and the gate-cathode voltage is applied across them. This voltage is used to turn the thyristors on and off. The output current is then controlled by adjusting the thyristors on and off.

The T620103004DN is designed for rectifier, inverter and chopper applications. In a rectifier, the T620103004DN is used to control the forward current, while in an inverter, it is used to control the dc link voltage. In a chopper, the T620103004DN is used to control the load current. It can also be used for three-phase motor control applications and in battery-charging systems.

The T620103004DN is also suitable for applications that require high switching frequencies, such as motor drives, UPS systems and lighting systems, as well as for soft-starting applications.

In conclusion, the T620103004DN is a high-performance three-phase thyristor module designed for high-current and high-frequency applications. It can be used for rectifier, inverter and chopper applications and offers high switching frequencies and high current capabilities.

The specific data is subject to PDF, and the above content is for reference