T7YA103MB40

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers are precision devices used to accurately adjust a parameter setting in a variety of different applications. They are commonly referred to as variable resistors, control as well as trim potentiometers. The T7YA103MB40 is a Trimmer Potentiometer that is used to adjust and maintain resistance in a given circuit, which is something that remains virtually unchanged due to its design.

The T7YA103MB40 is a single-turn trimmer potentiometer with an absolute resistance value of 1.0 kΩ. It is a three pin device that is located between a DC voltage source and a load resistor, providing an adjustable resistance value between the two. This resistance value is determined by the position of a movable contact called the wiper within the device.

The main function of the T7YA103MB40 Trimmer Potentiometer is to adjust the resistance of a given circuit to control the output voltage from the DC source to the load resistor, thus adjusting the voltage levels in the circuit. It is also used in applications where a very stable resistance is needed, such as with active filters or adjustable current sources. It is also used in various other applications, such as audio devices, industrial control circuits, automotive navigation systems and more.

The T7YA103MB40 is a carbon film trimmer potentiometer, which is a type of resistor that has a layer of non-conductive material between two metal layers. This layer of non-conductive material is then coated with a thin layer of carbon, which allows for a variable resistance to be achieved. This is done by adjusting the position of the wiper which is connected to the middle layer. The wiper serves to make contact with the carbon layer and move up and down to make contact with different points of the layer, providing different resistance values.

The working principle of the T7YA103MB40 Trimmer Potentiometer revolves around the metal layers and the wiper. The wiper is connected to the middle metal layer, and it touches and moves along the carbon film layer to adjust the resistance. This is done by the turning of the shaft on the outside of the physical body of the potentiometer, which in turn moves the wiper up and down the carbon layer, thus adjusting the resistance. Successive adjustment of the resistance is achieved via a simple rotation of the shaft.

In conclusion, the T7YA103MB40 is a variable resistance device used to precisely adjust a parameter setting in a variety of applications. It is a three-pin device, typically placed between a DC voltage source and a load resistor, offering an adjustable resistance value between the two. The T7YA103MB40 is a carbon film trimmer potentiometer, which makes use of a thin layer of carbon to achieve a variable resistance value, which is done by adjusting the position of the wiper which is connected to the middle layer of the potentiometer.

The specific data is subject to PDF, and the above content is for reference