T97F336K050CZS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitors that are comprised of tantalum in their anode, which provides a number of advantages over supercapacitors and aluminum electrolytic capacitors. Tantalum capacitors offer higher power densities, higher capacitance per volume, lower equivalent series resistance (ESR), and improved volumetric efficiency. An example of a tantalum capacitor is the T97F336K050CZS, which is a single layer radial leaded tantalum capacitor with a nominal capacitance of 33μF and a maximum working voltage of 6.3 volts.

Application Field

Because of the unique advantages tantalum capacitors offer, they are employed in a wide range of applications within the electronic industry. Some of these include:

• Power supplies
• Motor control
• Energy storage
• Communication systems
• Electromagnetic compatibility
• Defense and aerospace technology

Tantalum capacitors are also used in consumer electronics, including computers, mobile phones, and LCD TVs. They are preferred for applications that require a high capacitance and low losses at high frequencies, as they are well-suited for applications such as power converters, voltage regulators, and signal filters.

Working Principle

Tantalum capacitors are formed using a tantalum anode with a dielectric oxide layer and an electrolyte. They can be either polarized or non-polarized, but most often they are polarized. In their polarized state, the cathode electrode is connected to the negative side of the voltage source and the anode electrode is connected to the positive side. This arrangement allows current to flow from the cathode to the anode and charge the capacitor.

When the capacitor is charged, the dielectric oxide layer stores the charge, which results in electrical energy stored in the capacitor. When the capacitor is discharged, the voltage across the capacitor decreases and the charge returns to the electrodes. The entire process is repeated when the capacitor is charged again, and this cycle continues as long as the capacitor is operable.

The T97F336K050CZS is typically used in applications which require low ESR ratings, such as voltage regulators and filters. Because of its high capacitance per volume it is also a good choice for energy storage applications. With its 6.3V rating the T97F336K050CZS can handle a wide variety of applications, but it is important to pay attention to the manufacturer’s ratings as the capacitor can be damaged if over-voltage or over-current is applied.

The specific data is subject to PDF, and the above content is for reference