T9GS5L14-15

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps, encompass many applications. One such is the T9GS5L14-15 range of relay. This device and its associated components, when used in combination, provide an extremely effective switching method in almost any case.

The T9GS5L14-15 is a four-pin, two-pole relay rated at up to 5A. It has a maximum voltage rating of 240V. It is designed for use in an AC circuit with a maximum operating temperature of 50 degrees Celsius. The T9GS5L14-15 is also designed for applications with an UNECE approved voltage rating.

Like all relays, the T9GS5L14-15 uses the same basic principles to operate. A coil in the relay is energized with electricity. When the coil is energized, it creates a magnetic field. This field attracts an armature, which is usually a spring-loaded metal "arm" inside the relay. The armature, when engaged, will move and make or break an internal switch. The internal switch will then either break or make an electrical connection, thus controlling the circuit.

In the case of the T9GS5L14-15, the internal switch consists of a pair of SPDT (single-pole double-throw) contacts. The contacts are separated into two areas; normally open and normally closed. When the coil is energized, the armature will move and the internal switch will either make or break the connection. This allows for either a single or double set of high current capabilities due to the two-pole design.

The T9GS5L14-15 can be used in various applications such as industrial automation, automation systems, auto pilot systems and motor control systems. It can also be used for switching AC voltages for industrial machinery, HVAC system controllers, car alarms, electronic door locks and various other consumer applications. The relay is energy efficient and can also be used in surge protection circuits.

To maximize its performance in each of these applications, there are a few design features that should be taken into consideration. Firstly, a standard relay will de-energize when the power is removed from the coil. To have the contact stay in position when the power is removed, the T9GS5L14-15 must be mounted with the “lock-on” feature. Additionally, to ensure optimum performance and reliability, the relay should be mounted on a heat sink with a clip or another mounting device.

The T9GS5L14-15 is a versatile and reliable two-pole relay with a maximum current rating of 5 amps and a voltage rating of up to 240 volts. It can be used in many applications and features locking contacts, making it suitable for long-term use. Because it is designed to operate in an AC circuit with an approved voltage, it is a great choice for use in industrial and consumer applications. With careful attention paid to its mounting and wiring, the T9GS5L14-15 can ensure a safe and efficient connection in the most challenging of environments.

The specific data is subject to PDF, and the above content is for reference