TA75W393FU,LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear comparators are electronic circuits with two separate voltage inputs, typically referred to as inputs A and B. When the voltage of one input exceeds the other, the comparator will switch states and output a high or low signal. Usually the signal is in the form of a logic output such as a TTL or CMOS signal. The TA75W393FU LF linear comparator is a dual comparator designed to operate from 0.9 V to 6 V and is rated for up to 0.4 pA low input bias current.

The TA75W393FU LF linear comparator is designed with a low operating current of 0.2 mA typ and 5 nA maximum. It has hysteresis control and an output disable feature. It also features a reverse voltage protection up to -18V under electrical overstress conditions. With these features, the TA75W393FU LF linear comparator is optimised for low voltage applications and to support low power consumption.

Applications for the TA75W393FU LF linear comparator are broad, such as for level-shift circuits, switch indicate signals, or digital power management. It is widely used for mobile devices or devices that rely on low voltage CMOS technology for control and monitoring. The comparator can also be used for a variety of other tasks such as detecting current overload or protecting devices from overvoltage.

The working principle behind the TA75W393FU LF linear comparator is fairly simple. When the voltage of one input exceeds the other, the comparator will switch states and output a high or low signal. This is done through the use of an internal voltage reference. This voltage reference is generated internally by the comparator and is used to compare the input voltages to. If the voltage of one of the inputs is higher than the voltage reference, the output will go high, and if it is lower, the output will be low.

Additionally, the comparator can also be configured to provide hysteresis. This is done by using an internal resistor network and a capacitor. The resistor network sets the amount of hysteresis, and the capacitor allows for a degree of frequency compensation to better control the amount of on/off time for the application the comparator is being used for.

The TA75W393FU LF linear comparator is a versatile component that can be used in a wide range of applications from low-level analog to high-end digital control. It is optimised for low voltage applications and provides an easy way to monitor and control signals for modern devices. With a range of features and an easy to use design, the TA75W393FU LF linear comparator can be used in many applications.

The specific data is subject to PDF, and the above content is for reference