TAH20P2K00JE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors:

Through hole resistors, or simply THRs, are physical electrical components consisting of a metal film or resistive wire embedded in an insulating substrate. They are typically used to control current and minimize conductive losses. THRs are widely used in a variety of applications, including in the human body, automotive systems, and electronics.

TAH-20P2K00JE is one such THR type that falls under the category of water-soluble polyester film resistors. These resistors are designed for surface-mounting on printed circuit boards (PCBs), where components of relatively lower power are assembled. TAH-20P2K00JE houses nickel-plated stainless steel terminals which are attached to the PCB with the assistance of soldering. These terminals are also corrosion-resistant, enabling the resistor to operate for a longer period without being affected by environmental exposure.

The working principle behind TAH-20P2K00JE resistors can be explained with the help of Ohm’s law. Ohm’s law states that the current flowing through a resistor is directly proportional to the voltage applied across it. This means that if the voltage applied across the resistor is increased, the current flow across it will also increase. This property of TAH-20P2K00JE resistors can be used to control the current flow in circuits, by setting the voltages across them. For example, if a voltage of 3V is applied across a TAH-20P2K00JE resistor, the current flowing through it can be controlled by decreasing or increasing the applied voltage. This way, the current flowing through the resistor can be regulated.

TAH-20P2K00JEs can also be used in applications where reliable protection of circuit components is needed. When excessive current flows through an electronic circuit, the components are at risk of being damaged. Placing a THR in such a circuit will help to protect the components from damage by limiting the current flow. THRs are designed to dissipate or absorb a considerable amount of the excessive current before the circuit components become affected.

Another widely used application of TAH-20P2K00JE is as noise suppressors. THRs have the ability to absorb and dissipate noise and electrical interference due to their characteristics. This property makes them especially useful in signal conditioning and filtering applications where measures must be taken to reduce signal noise and interference. As a result, these resistors can be used in areas where electrical noise or interference is a common problem.

Amongst other applications, TAH-20P2K00JE is also used for impedance matching. Impedance matching is a technique whereby the output impedance of a device is matched with the input impedance of another device in order to ensure a consistent voltage level between the two. By making use of TAH-20P2K00JE, the impedance of the device can be adjusted and thereby control the flow of current to ensure that it is within the required parameters.

THRs are highly versatile components due to their inherent properties and properties that can be changed artificially. As such, they are a preferred choice for many electrical applications which require reliable components and require minimal maintenance. TAH-20P2K00JE is one such THR type which has been designed with performance and reliability in mind, and can be used in a variety of different applications.

The specific data is subject to PDF, and the above content is for reference