TAH20P510RJE

Series:	TAH
Packaging:	Bulk
Part Status:	Active
Resistance:	510 Ohms
Tolerance:	±5%
Power (Watts):	20W
Composition:	Thick Film
Features:	Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	--
Package / Case:	TO-220-2
Supplier Device Package:	TO-220
Size / Dimension:	0.410" L x 0.125" W (10.41mm x 3.18mm)
Height - Seated (Max):	0.650" (16.52mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, or THRs, are among the oldest and simplest components used in electronic circuits today. They are usually cylindrical devices that consist of an insulating material, a metal layer, and a metal film. The resistance of the THRs is determined by the thickness of the metal layer and the physical size of the device. The resistance value of the THR is determined by multiplying the length of the device by the width of its metal layer.THRs come in many different sizes and shapes and can have different resistance values depending on the size of the device. The most common and cheapest THRs are through-hole mountable resistors or TMRs, which are cylindrical devices which have two metal layers. TMRs can be found as single-ended or two-ended resistors. The resistance value of a TMR is determined by the physical size of the device and its physical length.The TAH20P510RJE THR is a single-ended resistor designed for use in high power circuits. It is composed of two metal layers which are insulated by an insulating material. The resistance value of this THR is 25 ohms and it is designed to be used at temperatures up to 150°C. The metal layers ensure that the resistor’s resistance value remains constant over its lifetime, even at higher temperatures.The TAH20P510RJE’s application field is mainly industrial and commercial circuits. It is system-on-chip solutions, which provide reliable, low-cost power supply for LED lights, motors, and other components. This THR can also be used with power circuits in automotive applications, where it can work with both AC and DC electrical systems. The working principle of the TAH20P510RJE is based on the principle of ohmic resistance. It is based on the fact that the resistance of a wire or other material is determined by its length, cross section, and the resistivity of the material itself. This THR follows this principle by having two metal layers, one of which is the resistor\'s cross-sectional area, which makes up its lenght and resistivity. When a voltage is applied to the THR, electrons flow through the metal layers, causing a resistance. The resistance of the THR is dependent on the lengths and resistivity of both metal layers. The TAH20P510RJE THR is a reliable and cost-effective solution for higher power applications. Its applications are mainly seen in both industrial and commercial circuits where reliable and cost-effective power supply is required. Additionally, this THR is designed to operate at temperatures up to 150°C, ensuring that its resistance remains consistent and reliable even at high temperatures.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description