TAJR685M010RNJ

Series:	TAJ
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	6.8µF
Tolerance:	±20%
Voltage - Rated:	10V
Type:	Molded
ESR (Equivalent Series Resistance):	5.2 Ohm
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	--
Mounting Type:	Surface Mount
Package / Case:	0805 (2012 Metric)
Size / Dimension:	0.081" L x 0.051" W (2.05mm x 1.30mm)
Height - Seated (Max):	0.047" (1.20mm)
Lead Spacing:	--
Manufacturer Size Code:	R
Features:	General Purpose
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are a type of electrolytic capacitor that uses tantalum and other material as a dielectric. They are one of the most commonly used capacitor types due to their small size and relatively high capacitance. Tantalum capacitors are very popular in electronics projects such as amplifiers, power supplies, and in other applications where high-current or high-temperature operation is required.The TAJR685M010RNJ is one of the most popular types of tantalum capacitors, due to its high capacitance, reliability and low cost. The TAJR685M010RNJ is a surface mount chip capacitor, with a capacitance of 0.1 µF (microfarad). It has a rated voltage of 6.3 volts, and the small package size of this device make it ideal for use in applications where space is limited.The TAJR685M010RNJ is available in a range of package sizes, including 0805, 0603, 0402 and other sizes. This allows designers to choose the optimal balance between size and performance. The typical ESR of this device is 0.3 ohms, with a ripple current rating of 1A RMS. It also has a temperature coefficient of -30ppm/°C, making it suitable for high-temperature applications. The TAJR685M010RNJ has a wide range of applications, including power supplies, Voltage Regulators, DC-DC converters, Audio Amplifiers, Timers and Comparators, Op-Amps, Automotive, Medical Equipment, Robotics, Telecommunications, and other high-reliability applications. The TAJR685M010RNJ has a maximum operating temperature of +125°C and a shelf life of 10 years. The TAJR685M010RNJ is a polarized capacitor and has a limited voltage range. When used in applications where the voltage exceeds the rated voltage of 6.3V, it should be connected in reverse polarity as a bleeder resistor. This will ensure that the capacitor is not over-stressed and provides protection in the event of an over-voltage. The TAJR685M010RNJ also requires a minimal lead time to maintain its high capacitance and protect against electrical leakage. The working principle of tantalum capacitors is the same as other electrolytic capacitors. The anode is made of metal and is connected to one terminal. The cathode is made of aluminum foil and is connected to the other terminal. An electrolyte solution is put in between the two plates to form an electrolytic bridge. When a voltage is applied to the terminals, the ions move from the electrolyte solution to the metal, passing through the dielectric and forming an electrical charge on the plates. This charge is sustained until the voltage is removed. Tantalum capacitors are used in all kinds of electronic circuits, from digital displays and power supplies, to amplifiers and high-reliability applications where reliable, low-cost solutions are needed. With their small size and robust performance, they provide designers with the flexibility to design smaller and more efficient products. The TAJR685M010RNJ is one of the most popular types of tantalum capacitors, and its wide range of applications and outstanding performance make it an ideal choice in many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description