TAJS475M010RNJ

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	S
Lead Spacing:	--
Height - Seated (Max):	0.047" (1.20mm)
Size / Dimension:	0.126" L x 0.063" W (3.20mm x 1.60mm)
Package / Case:	1206 (3216 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TAJ
ESR (Equivalent Series Resistance):	5 Ohm
Type:	Molded
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	4.7µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are electrochemical capacitors which use a thin oxide layer of tantalum on the surface of the capacitor\'s key plate as the dielectric medium between two electrodes. This oxide layer is charged within an electric field and thus increases the capacitance. These capacitors are available in various sizes and shapes, including surface mount and through-hole varieties.The TAJS475M010RNJ is one of these tantalum capacitors. It has a capacitance of 475 uF, a maximum of 10 volts, and an operating temperature range of -55°C to +85°C. Its height is 4.4 mm, its length is 7.5 mm, and its width is 5 mm. It is a surface mount tantalum capacitor with a radial leaded construction and a non-polarized configuration.The TAJS475M010RNJ can be used in a wide range of applications, from high frequency filtering and smoothing to line frequency filtering and energy storage in high voltage DC link circuits. It is used for buffering and for providing surge current protection. It is suitable for low-cost filtering applications, such as line conditioning for motor drives, in-line suppressors, and high frequency power supplies.The working principle of a TAJS475M010RNJ is the same as that of any other capacitor. It stores energy through an electrostatic field between two conducting plates, i.e., the capacitor\'s plates, which are separated by an insulating layer, in this case, a thin layer of tantalum oxide. When current is supplied to the capacitor, it builds up a charge on each plate. An opposing charge will also be created due to the electrostatic attraction of the positive and negative charges to one another. This opposing charge builds up until it matches the charge on the capacitor plate.When the voltage on the capacitor plate exceeds the opposing charge on the other plate, a current will flow. This current will then charge the capacitor or discharge it, depending on the direction of the current. The charging and discharging of the capacitor is what helps to filter any voltage spikes or other unwanted noise on the line.In short, a TAJS475M010RNJ is a tantalum capacitor with a capacitance of 475 uF, a maximum of 10 volts, and an operating temperature range of -55°C to +85°C. It has a variety of applications, including high frequency filtering and smoothing, buffering, surge current protection, and low-cost filtering applications. Its working principle relies on creating an electrostatic field between two metal plates using a tantalum oxide layer as an insulator. This field is then used to store and filter electrical energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description