TAN1109F-1-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TAN1109F-1-TR is a device designed to interface between thin-film transducers and test circuits. It is an integrated circuit that provides a high level of precision and accuracy for measurement of small resistances. The TAN1109F-1-TR is a particularly useful device for use in applications such as medical diagnostic systems, gas sensors, pressure sensors, strain gauges, and other devices. It is also suitable for a variety of other types of analog circuitry.

The TAN1109F-1-TR is a precision amplifier designed to provide a constant output of up to 9V with a maximum input of 5V. The output voltage is controlled by an adjustable 5V reference which is determined by the input signal. This allows for a wide range of signal amplitudes and resistance values to be accurately measured. Additionally, the device has a linear range of up to 0.25Ohm and is capable of measuring DC or AC signals.

The precision of the TAN1109F-1-TR is due to its high linearity, high stability, and low-noise characteristics. The device has a high input impedance of 1MOhm and a gain of 10 which makes it suitable for a wide range of transducers and circuits. The TAN1109F-1-TR is also equipped with an on-board level shifter, an on-board reference voltage, and an on-board power supply. This allows it to be used in a wide variety of applications without the need for external components. Additionally, the device is available in different packages which makes it very easy to integrate with other devices and circuits.

The TAN1109F-1-TR is typically used in applications where accurate and reliable measurements of small resistances are required. The device is particularly useful in medical diagnostic systems as it can be used to accurately measure small changes in the electrical resistance or other electrical parameters of human tissues. The TAN1109F-1-TR is also used in gas sensors and pressure sensors where highly precise measurements of small changes in pressure are required. Additionally, the device can be used in strain gauges and other types of analog circuitry.

The working principle of the TAN1109F-1-TR is based on the Wheatstone bridge. The device is effectively a bridge circuit consisting of four resistors. This allows the device to measure the resistance of the transducer or other device connected to it. The four resistors used in the device are a fixed resistor, an adjustable potentiometer, and two variable resistors. The fixed resistor is used to provide a constant current to the transducer. The adjustable potentiometer is used to vary the voltage applied to the input of the device. The two variable resistors are used to balance the Wheatstone bridge to obtain a null voltage.

Once the bridge is in balance, the voltage measured at the output of the bridge is proportional to the resistance of the transducer or other device. The TAN1109F-1-TR also includes an on-board level shifter which can translate the output voltage to a different level, depending on the particular application. Additionally, the device has an on-board reference voltage which is used to provide a constant output voltage regardless of the input signal.

In summary, the TAN1109F-1-TR is a precision amplifier designed to provide a constant output voltage with a maximum input signal of 5V. The device has a high input impedance of 1MOhm and a gain of 10. It also has an on-board level shifter, an on-board reference voltage, and an on-board power supply which makes it suitable for a wide range of applications. The working principle is based on a Wheatstone bridge which allows the device to accurately measure the resistance of the transducer or other device connected to it.

The specific data is subject to PDF, and the above content is for reference