TB6614FNG,C,EL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TB6614FNG, C and EL products are classified as PMIC - Motor Drivers, Controllers due to the application fields they are designed to meet. Motor drivers, controllers, as the name implies, refer to the power IC solutions for controlling the position, speed and acceleration of electric motors.

TB6614FNG, C and EL are the new Toshiba motor driver ICs. They are intelligent motor controllers that integrate motor driver, current control and current consumption detection functions into a single chip. The TB6614FNG, C, EL have a built-in 3-phase current control H-bridge circuit with built-in protection and a power supply voltage regulator. The TB6614FNG, C, EL are designed to meet various applications in the market, such as small electric power reclining systems, voice controllable systems, and commercial robots.

The TB6614FNG products are best suited for applications with a power supply voltage range of 9V to 18V, an operating temperature range of -40°C to +85°C and current capacity of 1A. The TB6614FNFG and TB6614FNFG-L products are best suited for applications with a power supply voltage range of 7.2V to 16V, an operating temperature range of -40°C to +125°C and current capacity of 1.3A. The TB6614FEL series also has a maximum current capacity of 1.3A.

The TB6614FNG, C and EL products have FETs built into the device and a low saturation voltage of 200mV with a high-speed driver, which enables a high system efficiency. The TB6614FNG, C, EL provide various protection and control functions, such as over current, thermal shutdown, dead time adjustment, overvoltage and under voltage protection functions.

The TB6614FNG, C and EL have a simple and flexible control interface. All ICs use the same pin arrangement for easy design and implementation. The DIR input indicates the rotation and direction of the motor, the PWM (pulse width modulation) input is used for pulse width modulation control, and the ENABLE pin controls the on/off state of the motor. The input/output logic can be set to either TTL (transistor-transistor logic) or CMOS (complementary metal-oxide semiconductor) logic.

The TB6614FNG, C and EL motor drivers, controllers provide high speed and large current control for motor applications. With the protection, control and current monitoring functions, the TB6614FNG, C, EL are the perfect solution for a variety of motor control applications.

The specific data is subject to PDF, and the above content is for reference