TBJD106K035LRSB0023

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	High Reliability
Ratings:	COTS
Manufacturer Size Code:	D
Lead Spacing:	--
Height - Seated (Max):	0.122" (3.10mm)
Size / Dimension:	0.287" L x 0.169" W (7.30mm x 4.30mm)
Package / Case:	2917 (7343 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TBJ
ESR (Equivalent Series Resistance):	125 mOhm
Type:	Molded
Voltage - Rated:	35V
Tolerance:	±10%
Capacitance:	10µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TBJD106K035LRSB0023: The Tantalum Capacitors

Introduction

Tantalum capacitors, also known as surface mount tantalum capacitors, are part of a group of components used in electronic components and assemblies. The particular model is a TBJD106K035LRSB0023, which is a surface mount capacitor available in two lead spacing packages (EIA 0204 and EIA 0402) and a wide range of capacitances. This particular capacitor is rated for 106K_voltage and 35volts, and has a low temperature coefficient of capacitance.

Application Field

The main application of the TBJD106K035LRSB0023 capacitors is for use in high density, board-level filtering and decoupling. These components are suitable for mobile phones, laptop computers and other consumer electronics where small size is required. Additionally, TBJD106K035LRSB0023 capacitors are ideal for applications in which frequency is low, such as in low power system regulators, power supply control and low frequency amplifiers.

Working Principle

The working principle of the capacitor is based on the storage of electrical energy, or electricity, in an electrical field. Essentially, an electrical field is created between two metal plates, or “electrodes”, separated by an insulating material called a dielectric material. When an electrical current flows through the metal plates, the electrical field is generated and can store charge.The two metal plates inside a capacitor are connected to a pair of conducting leads that are connected to the power source. The current flows through the capacitor and combines with the dielectric material to form an electrical field within the capacitor. This electrical field stores the electrical energy, which can then be tapped off when you need it.

Pros & Cons

One of the primary advantages of using tantalum capacitors is the fact that they are very small in size and can help save space on PCBs. Additionally, they have low leakage current levels, which can be beneficial in some applications. Furthermore, tantalum capacitors have a high capacitance level, making them suitable for applications operating at high frequencies.On the other hand, there are some drawbacks to using tantalum capacitors. One of the major downsides is their cost, as they tend to be quite expensive, especially compared to other types of capacitors. Additionally, they operate best at lower temperatures, so applications that require the capacitor to operate at higher temperatures may not be suitable for them. Furthermore, if a circuit requires a large amount of capacitance, a tantalum capacitor may not be the best choice.

Conclusion

Overall, the TBJD106K035LRSB0023 is a highly specialized surface mount tantalum capacitor that is typically used in applications where size requirements are tight and low frequency operation is needed. These capacitors are capable of providing high capacitance with low leakage values and are relatively affordable compared to other capacitors. However, it is important to consider the drawbacks and limitations of the capacitor before investing in it for any given application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description