TC74AC273F(EL,F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-flops are a type of bistable latch circuit that are mainly used in digital circuits.

The TC74AC273F(EL,F) is a flip-flop type Logic IC (Integrated Circuit). It is a 8-bit edge triggered D type flip-flop that is specifically designed for high speed applications. The device consists of 8 individual D type flip-flops with preset, clear and toggle features. Each flip-flop has an independent data input (D), clock input (CK), clear input (CLR) and output (Q) pin.

The input signals to the TC74AC273F(EL,F) can be either active high (EL version) or active low (F version). The Cycle time of 25ns and the propagation delay time between 0.2 uS to 0.9 uS are some of the specifications of this device. The maximum power dissipation of the device is 10mW.

The TC74AC273F(EL,F) is designed using advanced CMOS technology and is very cost effective as compared to other types of logic devices. It is suitable for use in applications where fast switching is required such as in microprocessors, controllers, combinational and sequential logic designs. It is also used in applications where low power dissipation is required such as in laptops, mobile phones and other portable devices.

The working of the TC74AC273F(EL,F) is quite simple. The data (D) is applied to the input of the flip-flop and is held until a clock (CK) pulse arrives. When the clock pulse arrives, the data at the D input is transferred to the flip-flop output (Q) and held. At the same time, the flip-flop output is fed back to the data (D) input. This creates a latching action and the output of the flip-flop is held until the next clock pulse is received.

The TC74AC273F(EL,F) also has a clear (CLR) input that when held high clears the contents of all the flip-flops connected to it. The preset (SET/RST) input when held high sets all the flip-flops connected to it to a logic 1. The toggle (TGL) input when held low, toggles the output of the flip-flop the total number of times equal to the number of clock pulses received.

In conclusion, the TC74AC273F(EL,F) is a type of Flip-Flop that is specifically designed for high speed applications. It is ideal for use in microprocessors, controllers, combinational and sequential logic designs as well as in applications where low power dissipation is required. The working of this device is quite simple and it can be used to create latch or toggle action.

The specific data is subject to PDF, and the above content is for reference