TC74HC541APF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TC74HC541APF is a logic - buffers, drivers, receivers, and transceivers, providing a variety of digital interface functions. It is a sixteen-bit, three-state buffer/driver and is constructed using CMOS logic. This device is used both in asynchronous and synchronous systems and offers several configuration options.

The TC74HC541APF is widely used in multiple applications, such as telecommunications, automobiles, consumer electronic products and general logic systems. It is used in microcontroller applications to control multi-level signals and in switching interface applications. It is also used in multiplexers to control the data flow from one bus to another bus.

The TC74HC541APF contains 16-pins with one enable pin and three select pins. The enable pin controls all data register signals, transfers data, and latches the data. The select pins are used to select the source of data or the target for data. The logic for the enable and select pins of the TC74HC541APF is active low logic, meaning when the pin is set high the registers are disabled, and when set low the registers are enabled.

The input and output signals of the TC74HC541APF are TTL (Transistor-Transistor Logic) voltage levels and are designed for operation from 0 to 7V. The input pins are also powered with up to 18mA of current, allowing for a higher current output during switching. The input registers have a Schmitt trigger, which is responsible for reducing noise and making the application more robust.

The TC74HC541APF has two different output stages, the unselected and selected. In the unselected mode, the driver is used with the address register and the data register. When an address is selected, the data register is enabled and the data is stored. The driver acts as a buffer, which is responsible for outputting the data on the output pin.

In the selected mode, the output is enabled and the data is driven through the output pin. The data can be transferred to the output pin by enabling the enable pin. The select pins act as additional address lines and can be used to select a data register.

The output is controlled by the output enable and select pins. The output enable pin is used to enable or disable the output data pin. The select pins act as a multiplexer for the data and can be used to select the source of data.

The TC74HC541APF is a very popular device and is designed to provide a fast and reliable way of transferring data from a bus to another bus. It is also able to provide a flexible solution to multiplexing input data and output data. The device is also used in applications such as memory control and digital-to-analog conversion.

The specific data is subject to PDF, and the above content is for reference