TCA0372DP2G

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Amplifier Type:	General Purpose
Number of Circuits:	2
Output Type:	--
Slew Rate:	1.4 V/µs
Gain Bandwidth Product:	1.4MHz
Current - Input Bias:	100nA
Voltage - Input Offset:	1mV
Current - Supply:	5mA
Current - Output / Channel:	1A
Voltage - Supply, Single/Dual (±):	5 V ~ 40 V, ±2.5 V ~ 20 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.300", 7.62mm)
Supplier Device Package:	16-DIP
Base Part Number:	TCA0372

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TCA0372DP2G is an operational amplifier (op amp) from Texas Instruments that is an FET-input dual-operational amplifier. This op amp has a wide operating voltage range from 2.8V to 15V, making it suitable for a variety of applications. It features low offset voltage, low distortion, high speed, and high output current. The TCA0372DP2G has two independent inputs, two output pins, and two supply pins. It is designed for use in instrumentation amplifiers, active filters, buffer amplifiers, and voltage-to-current converters. This op amp can be used to amplify signals, buffer the input and output signals, and provide gain control in applications. The circuit requirements of a particular application determine the working principle of the TCA0372DP2G op amp. In general, it works by converting a small differential input voltage into a large differential output voltage. As its name implies, this is done by amplifying the input signal. In an operational amplifier, the two input terminals are connected to ground and the output is taken from the two output pins. The TCA0372DP2G is primarily used in instrumentation amplifiers, active filters, buffer amplifiers and voltage-to-current converters. Instrumentation amplifiers use the op amp to amplify small input signals that may have large common mode signals present. Active filters, such as low-pass, high-pass, band-pass, and notch filters, use the op amp to shape the audio signal and eliminate unwanted frequencies. They can also be used to create inverted phase environments. Buffers are used to isolate the load from the preceding stage and provide low output impedance. Finally, voltage-to-current converters can be used to convert signals from voltage to current.Instrumentation amplifiers are used in many fields, including automotive, consumer electronics, medical and industrial. They are commonly used to measure low level electrical signals from sensors and transducers, and their high input impedance allows them to be used in data acquisition applications. Instrumentation amplifiers are also used in audio applications, for example for equalization in stereo systems. Active filters are generally used in sound systems and audio equipment. They are used to alter or shape the frequency of the signal in order to separate and amplify different frequency components or reduce unwanted noise. They can also be used to create harmonic distortions, which can be used for sound effects. Buffer amplifiers are used to interface two different circuits that may have different supply potentials. They buffer the signal coming from the preceding stage and providing low output impedance, effectively matching the high input impedance of the succeeding stage. Finally, voltage-to-current converters are commonly used in 4-20mA current loop applications, where they are used to convert the low level voltage signals from sensors into high level current signals. This allows signals to be transmitted over long distances while maintaining a low signal level and eliminating the need for external power sources.The TCA0372DP2G op amp is a versatile component that can be used in a wide variety of applications. Its wide operating voltage range and high output current make it suitable for many uses, from instrumentation amplifiers to voltage-to-current converters. With its low offset voltage, low distortion, and high speed, it is able to provide excellent performance in all its applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description