TDA2616/N1,112

The TDA2616/N1,112 is a linear amplifier that is used in audio applications. It is a integrated circuit (IC) that consists of two independent operational amplifiers, two differential inputs and two single-ended outputs.

The amplifier is primarily used in audio applications, such as microphone pre-amplification, audio power amplifiers, and audio equalizers. It is also used in automotive applications, audio integrated circuits, medical equipment and audio mixing. The TDA2616/N1,112 is an ideal choice for applications where low cost, low power consumption and low distortion is desired.

The TDA2616/N1,112 is a low-power amplifier that delivers high performance. It has a wide operating voltage range (3V to 26V) and low quiescent current (Iq ≤1mA) which make it suitable for battery-operated portable equipment. It is a monolithic bipolar integrated circuit that has a low noise floor and low distortion levels.

The TDA2616/N1,112 works on the principle of linear amplification. It amplifies an input signal without introducing distortions to the signal. This is achieved by amplifying the incoming signal with a transconductance of 1.2 mA/ V. This means that the current that is produced from the input is proportional to the input voltage. The operating frequency of the amplifier is limited up to 16MHz for applications such as band filters with a limited frequency range.

The TDA2616/N1,112 is a low noise amplifier. It has a high input impedance and low noise voltage and current. The max noise voltage is 8 µV and the max noise current is 0.005 µA. This makes it suitable for applications like pre-amplification and equalizers where low noise is important.

The TDA2616/N1,112 has high linearity. It has has a low harmonic distortion and a high signal-to-noise ratio. This means that it is able to accurately reproduce the incoming signal without introducing distortions. The amplifier also has high output capability and can drive up to 8 ohm load.

The TDA2616/N1,112 is an ideal choice for audio applications. It is an integrated circuit that is small and has low power consumption. It offers high performance and has low noise, low distortion and low power characteristics. Thus, it is suitable for applications such as microphone pre-amplification, audio power amplifiers and audio equalizers.