Allicdata Part #: | TEC304-ND |
Manufacturer Part#: |
TEC304 |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Central Semiconductor Corp |
Short Description: | TRANSISTOR TO-106 |
More Detail: | Bipolar (BJT) Transistor |
DataSheet: | TEC304 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The TEC304, a type of bipolar junction transistor (BJT), is one of the most popular transistors used in many electronic equipment today. It has a wide range of applications including logic circuits, amplifier circuits, and even in circuits for communication, control and power conversion. The TEC304 is a single base-collector-emitter three-terminal semiconductor device.
Application Field
The TEC304 can be used in various circuits to control current flow in a circuit. It can be used as a switch in logic circuits or as an amplifier. One of the most common application of the TEC304 is in amplifier circuits. It can be used to amplify weak signals and to increase the current capacity of the circuit. Additionally, it can be used in communication, control and power conversion circuits. In these circuits, the TEC304 can be used to convert AC signals to DC signals or to regulate the power supply in the circuit.
Working Principle
The basic working principle of the TEC304 is based on the movement of charge carriers. When the base-emitter junction of the transistor is forward biased with a small voltage applied, current flows from the base to the collector. The collector current is controlled by this base current. This current controls the current flowing between the collector and emitter. The collector and emitter current depends on the base current. This current flow can be amplified or regulated depending on the needs of the application.
Design Parameters
When designing circuits using the TEC304, the following design parameters must be taken into consideration. The maximum collector-emitter voltage, collector-base voltage and emitter-base voltage must be within the safe operational range of the TEC304. The current gain of the device must also be within its prescribed range. Additionally, the minimum and maximum values of the base-emitter voltage must also be considered when designing circuits using the TEC304. The temperature of the environment must also be taken into account when operating the device.
Conclusion
The TEC304 is a single base-collector-emitter three-terminal semiconductor device which has a wide range of applications in electronics. It is widely used in logic circuits, amplifier circuits, and even in circuits for communication, control and power conversion. Its working principle is based on the movement of charge carriers which can be controlled by varying the base current. Finally, when designing circuits using the TEC304, the design parameters must be taken into consideration to ensure safe and efficient operation of the device.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TEC301-303 | Central Semi... | 0.0 $ | 1000 | TRANSISTOR TO-106Bipolar ... |
TEC304 | Central Semi... | 0.0 $ | 1000 | TRANSISTOR TO-106Bipolar ... |
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
TRANS PNP DARL 30A 120V DIEBipolar (BJT)...
TRANS PNP DARLINGTON DIEBipolar (BJT) Tr...
TRANS GENERAL PURPOSE TO-218Bipolar (BJT...
TRANS PNP 140V 1ABipolar (BJT) Transisto...
TRANS NPN 700V 3A I2PAKBipolar (BJT) Tra...