TFF1012HN/N1,135

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
RF Type:	Ku-Band
Frequency:	10.7GHz ~ 12.75GHz
Number of Mixers:	1
Gain:	30dB
Noise Figure:	9dB
Secondary Attributes:	--
Current - Supply:	52mA
Voltage - Supply:	5V
Package / Case:	16-VFQFN Exposed Pad
Supplier Device Package:	16-DHVQFN (2.5x3.5)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers

A RF mixer is a three-port device used to shift the frequency of an input signal through the process of frequency mixing. This is typically achieved using a non-linear active component, such as a diode, but can also be done with passive components such as transformers. RF mixers, like all mixers, require two input signals and produce two output signals.One of the most popular RF mixers on the market is the TFF1012HN/N1, 135. This mixer is specifically designed to have very low conversion loss, high isolation, and low insertion loss. It is capable of supporting both analog and digital signals with frequencies ranging from 900 MHz-3500 MHz.The TFF1012HN/N1, 135 uses a balanced Schottky diode bridge configuration. This means that there are two channels of independently controlled diodes within the bridge that maintain its balance. The diodes act as an active, non-linear mixer component that produces both the desired upper and lower sideband frequencies. The diodes also dissipate the output power during the mixing process, ensuring that the output power is low.The TFF1012HN/N1, 135 is designed to provide excellent linearity with minimal signal distortion. The linear nature of the device allows it to be used in many applications, from communication to broadcasting. The device features a low noise figure and high third-order intercept point, meaning that there is minimal signal loss due to a high level of signal-to-noise ratio. The high number of dB gain makes the TFF1012HN/N1, 135 an ideal choice for applications where reduce signal distortion is key.Due to its robust design and high linearity, the TFF1012HN/N1, 135 is widely used for both analogue and digital FM broadcasts. It is used to boost signal strength and reduce noise so that radio broadcasters can deliver quality sound with minimal interference. The device is also often used in television broadcasting to convert the frequency of a received signal into a higher or lower frequency before being sent to a receiver.The device is also widely used in satellite and mobile phones for frequency translation and up converters. The device is designed to minimize distortion so that signals with low power can be received without too much interference. Additionally, the TFF1012HN/N1, 135 is also used in phase-modulated signaling applications, such as in microwave links used for distance telemetry.In conclusion, the TFF1012HN/N1, 135 is an excellent choice for RF mixers due to its robust design, low noise figure, and high linearity. It is commonly used in both broadcast and telecommunication applications due to its ability to minimize signal distortion. With a wide range of applications, the TFF1012HN/N1, 135 is an ideal choice for any RF mixer application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description