THM 6-1215

Current - Output (Max):	250mA
Supplier Device Package:	--
Size / Dimension:	1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm)
Package / Case:	24-DIP Module, 5 Leads
Mounting Type:	Through Hole
Efficiency:	88.5%
Operating Temperature:	-40°C ~ 88°C
Features:	OCP, OVP, SCP
Applications:	Medical
Voltage - Isolation:	5kV
Power (Watts):	6W
Series:	THM 6
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	18V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The THM 6-1215 is a DC-DC converter. It is a high-efficiency and low-cost direct current to direct current (DC-DC) converter, which is generally used to step down or step up direct current voltages. It can also be used to convert direct voltage to alternating voltage for specific applications.The THM 6-1215 is a great choice for a number of applications, including LED Driver applications, Photovoltaic cell applications, Power Supply applications, Automotive/Marine applications, Telecommunication applications, and General Industrial applications. It is suitable for use in a wide variety of environments, from residential to harsh industrial applications.The main component of the THM 6-1215 is the high-performance controller IC. The controller offers the following features: switching frequency up to 1 MHz, synchronous modulation, minimum output current 0A, maximum current 0A, over voltage protection, over temperature protection, and a host of other features. The switching frequency of the controller can be programmed, allowing for adjustment of the efficiency of the converter for optimal power conversion.The THM 6-1215 converter operates in buck and boost modes. In buck mode, the converter takes a higher input voltage and steps it down to a lower output voltage. This is accomplished by regulating the amount of current that the inductor supplies to the load. In boost mode, the converter takes a lower input voltage and steps it up to a higher output voltage. This is accomplished by regulating the amount of energy stored in the inductor.The primary components of the THM 6-1215 are the transformer, controller, inductor, and diode. First, the transformer transfers energy from the main power line to the DC-DC converter. The transformer is made up of two parts, a primary and a secondary winding. Next, the controller converts the power into a DC output voltage and indicates the value at the output. Then, the inductor stores energy that is needed to convert the output voltage. Finally, the diode acts as a protection element and blocks reverse current from flowing back into the main power source.The overall efficiency of the THM 6-1215 is maximized by optimizing the design of the transformer, controller, inductor, and diode. For instance, the transformer is designed such that it maximizes the magnetic flux that is formed between its primary and secondary windings. This helps to achieve better voltage step-downs. The more efficient the magnetic flux is, the greater the efficiency of the converter. The controller also helps to maximize efficiency by controlling the inductor current. Finally, the diode helps reduce inefficiencies by protecting the system from reverse current flow.Overall, the THM 6-1215 is a great choice for many DC-DC conversion applications. It has a wide range of features that make it suitable for a variety of different applications. Its efficiency and cost make it an attractive solution for many different projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description