Operating Temperature:	-55°C ~ 200°C
Failure Rate:	--
Package / Case:	Axial, Box
Lead Style:	Solder Lugs
Height - Seated (Max):	0.354" (9.00mm)
Size / Dimension:	0.669" L x 0.669" W (17.00mm x 17.00mm)
Mounting Feature:	Flanges
Coating, Housing Type:	Aluminum
Features:	--
Series:	THS, CGS
Temperature Coefficient:	±30ppm/°C
Composition:	Wirewound
Power (Watts):	10W
Tolerance:	±5%
Resistance:	270 Ohms
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors

The THS10270RJ is a type of chassis mount resistor, designed for applications that require massive power handling capabilities. It is a three-pin through-hole device with a compact size, allowing easy installation and good heat dissipation. The THS10270RJ has metal resistive elements that provide high precision, excellent stability, and reliable performance under a wide variety of environments.The THS10270RJ is a high-power, high-precision resistor capable of handling up to 30 watts. It is designed to be used in high-voltage, high-current applications, such as RF power amplifiers, switching power supplies, and motor drive circuits. The resistive elements are composed of a tantalum-cobalt alloy, which has superior thermal conductivity and mechanical strength compared to other materials. This alloy also has a higher melting point than other materials, which makes it more stable and reliable under high-power conditions. The maximum operating voltage for the THS10270RJ is 100V, and the maximum operating temperature is 200°C.The THS10270RJ has a three-pin configuration and is designed to be mounted to the chassis with screws. The device consists of a housing, a ring terminal, and a base. The housing provides physical protection to the resistive elements and serves as a heat sink. The ring terminal provides electrical contact between the chassis and the resistor. The base is made of a dielectric material, which reduces the risk of short circuits and provides insulation between the resistor and the circuit board.The working principle of the THS10270RJ is based on Ohm\'s law, which states that the current flowing through a resistor is inversely proportional to the resistance. This means that by adjusting the resistance, the current can be controlled. The THS10270RJ is designed to provide an accurate, adjustable resistance by using a trimmer. The trimmer is a variable resistor, which can be adjusted to provide the desired resistance. The trimmer is connected to the three pins of the resistor: the first pin is connected to ground, the second pin is connected to the voltage, and the third pin is connected to the trimmer. By adjusting the trimmer, the resistance can be adjusted, thus controlling the current.In conclusion, the THS10270RJ is a type of chassis-mount resistor designed for high-power applications. It has metal resistive elements and a three-pin configuration, allowing easy installation and good heat dissipation. The working principle of the THS10270RJ is based on Ohm\'s law, and the trimmer is used to adjust the resistance to control the current. This device provides high precision, excellent stability, and reliable performance under a wide variety of environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description