Allicdata Part #: | TJF1051T/3/1J-ND |
Manufacturer Part#: |
TJF1051T/3/1J |
Price: | $ 0.28 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC CAN TRANSEIVER HS 8SOIC |
More Detail: | 1/1 Transceiver Half CANbus 8-SO |
DataSheet: | TJF1051T/3/1J Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 0.24890 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Transceiver |
Protocol: | CANbus |
Number of Drivers/Receivers: | 1/1 |
Duplex: | Half |
Receiver Hysteresis: | 120mV |
Data Rate: | 5Mbps |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package: | 8-SO |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The TJF1051T/3/1J is a respectable member of the interface family. It is classified as a driver, receiver, transceiver. It is designed for both analog input/output applications, as well as digital trigger devices.
The TJF1051T/3/1J is designed for use in devices that require a current interface, such as industrial automation and communications systems. It can handle the operating temperature range of -40°C to +85°C and can survive temperatures up to 125°C.
It is a three stage device, meaning it has a driver, a receiver, and a transceiver. The driver is used to amplify the signals being sent to and from the device. The driver has a selective input hysteresis compensation and a frequency selection filter, so it can reduce interference and noise and other unwanted signals. The receiver is used to receive the signals sent by the device, and the transceiver is used to convert the input and output signals into electrical signals.
The working principle of the TJF1051T/3/1J is quite simple. It takes an input signal and amplifies it, then passes it to the output side of the device. At the same time it passes a smaller, weaker signal to the receiver, which is then converted into a higher voltage and passed to the input of the driver. This process is repeated until the desired output is obtained.
The TJF1051T/3/1J is an excellent choice for applications that require a current interface, as it is designed to be robust and reliable. Its ability to reduce interference and noise, along with its wide temperature range make it suitable for a variety of applications. Its working principle is simple and effective, and its ability to convert signals into electrical signals make it an ideal choice for a wide range of industrial automation and communications systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TJF1052IT/2Y | NXP USA Inc | 1.51 $ | 2000 | DGTL ISOLATOR 2.5KV 2CH C... |
TJF1052IT/5Y | NXP USA Inc | 1.59 $ | 1000 | DGTL ISOLATOR 5KV 2CH CAN... |
TJF1052IT/1Y | NXP USA Inc | 0.0 $ | 1000 | DGTL ISOLATOR 1KV 2CH CAN... |
TJF120100 | Amphenol Pcd | 53.51 $ | 1000 | GROUND FLANGE MOUNT, SIZE... |
TJF120101 | Amphenol Pcd | 66.89 $ | 1000 | GROUND FLANGE MOUNT, SIZE... |
TJF1051T/3,112 | NXP USA Inc | 0.81 $ | 3214 | IC CAN TRANSEIVER HS 8SOI... |
TJF1051T/3/CM,118 | NXP USA Inc | 0.28 $ | 1000 | IC TRANSCEIVER CAN 8SOIC1... |
TJF1051T/1J | NXP USA Inc | 0.28 $ | 1000 | IC CAN TRANSEIVER HS 8SOI... |
TJF1051T/3/1J | NXP USA Inc | 0.28 $ | 1000 | IC CAN TRANSEIVER HS 8SOI... |
TJF1051T/3,118 | NXP USA Inc | 0.29 $ | 5000 | IC CAN TRANSEIVER HS 8SOI... |
IC transceiver Automotive Local Intercon...
LIN Transceiver Automotive System Basis ...
IC TRANSCEIVER 1/1 8SOIC,AEC-Q100
IC TXRX MULTIRATE 16BIT 208-BGA1/1 Trans...
IC TXRX CAN HS 5.25V 8-SOIC1/1 Transceiv...
IC CAN TRANSCEIVER HS 8-SOIC1/1 Transcei...