TL022CP

Voltage - Input Offset:	1mV
Base Part Number:	TL022
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	10 V ~ 30 V, ±5 V ~ 15 V
Current - Output / Channel:	6mA
Current - Supply:	130µA
Series:	--
Current - Input Bias:	100nA
Gain Bandwidth Product:	500kHz
Slew Rate:	0.5 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL022CP Application Field and Working PrincipleTL022CP is a dual low-power operational amplifier (op amp) chip with high input impedance and low voltage noise, making it useful in a variety of instrumentation applications. The TL022CP is part of the TL022 family of op amps, which is manufactured by Texas Instruments. The TL022CP is a monolithic operational amplifier consisting of two individual amplifiers that share many features. It features the same wide gain bandwidth product, high input impedance, and output impedance as the rest of the TL022 family of op amps, but with a lower voltage noise in comparison. This makes the TL022CP particularly suitable for applications such as signal conditioning and amplification, as well as active filters, peak detectors and integrators. The TL022CP has a single rail power supply design, meaning that it only needs a single voltage source to power both amplifier channels. It can run up to ±18V for each channel, with a power supply current of about 0.4mA for each channel. The maximum output voltage swing of ±7V gives the amplifier an output voltage swing of ±13V when differential output is used. The TL022CP has a closed-loop gain bandwidth product of 1600kHz, making it an excellent choice for applications requiring a high-speed response time. It is designed to handle a very high slew rate of 3V/μs, making it suitable for use in high frequency circuits. Additionally, the TL022CP features a low input offset voltage of 1mV, and a low input bias current of 10nA. In terms of circuit design, the TL022CP can be used to create a variety of different circuits, depending on the needs of the application. For example, it can be used to build an active filter, a peak detector, an integrator, a comparator, and an inverting amplifier. Additionally, the TL022CP can be used to create a differential amplifier circuit and an AC-coupled amplifier. As with all op amps, the TL022CP has certain restrictions that must be taken into consideration when designing circuits. For example, its high input impedance means that it is not suitable for applications which require strong input protection. Additionally, the TL022CP\'s input noise parameters may be degraded if placing the chip close to other components, such as transformers, power supplies, and fluctuating conditions. In conclusion, the TL022CP is a versatile operational amplifier which can be used for a range of instrumentation applications. Its features such as high-gain bandwidth, low-voltage noise and single-rail power supply make it ideal for use in a variety of circuits, from active filters to peak detectors and integrators. When designing circuits with the TL022CP, it is important to take into consideration the chip\'s limitations in terms of input protection, as well as potential noise issues with nearby components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description