TL052IDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL052IDR is a monolithic dual 0.5 ohm amplifier with low-impedance output drivers. It has been developed for use in instrumentation, OP amps, and buffer amps applications.

The TL052IDR operates an instrumentation amplifier that has a gain that is adjustable from 0 to about 250, with a minimum input voltage of 0.15V. The amplifier has a low-impedance output FET driver, allowing it to drive loads with a low amount of power dissipation. It also features a wide temperature operating range and low overall distortion.

The instrumentation amplifier is designed to measure the differential signal between two input signals. Typically, one input is a reference voltage and the other input is the signal to be measured. The amplifier will then take the difference between the two signals and amplify it to extract the desired information.

The TL052IDR amplifies the differential signal through two N-channel MOSFET transistors, one for each input. Each of the transistors works in the common-source configuration with the same source resistor R1 connected to the output. When the input voltage of the first transistor changes, the second transistor is activated by the first transistor and the output voltage increases.} As the voltage of the second transistor increases, the output voltage increases as well according to the equation: VOUT = A(Vin_1-Vin_2) + Vin_1.

The output voltage can be adjusted with R2, R3, and R4 potentiometers. These resistors act as variable feedback elements, and they are used to adjust the gain of the amplifier. The amplifier is also equipped with a low-impedance FET output driver, which allows it to drive heavy loads without dissipating too much power. This is especially useful in instrumentation applications, where accuracy is key.

The TL052IDR also features a wide temperature operating range, which allows it to be used in applications requiring large temperature ranges. The amplifier also has low overall distortion and low long-term drift, allowing it to be used in high-accuracy measurement applications.

Overall, the TL052IDR is a great option for use in instrumentation, OP amps, and buffer amps applications. It has a wide gain range, low-impedance output FET driver, wide temperature operating range, and low distortion and long-term drift. These features make it an ideal choice for high-precision measurement applications.

The specific data is subject to PDF, and the above content is for reference