TL071ACN

Voltage - Input Offset:	3mV
Base Part Number:	TL071
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	6 V ~ 36 V, ±3 V ~ 18 V
Current - Output / Channel:	40mA
Current - Supply:	1.4mA
Series:	--
Current - Input Bias:	20pA
Gain Bandwidth Product:	4MHz
Slew Rate:	16 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	J-FET
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL071ACN is a part of the family of operational amplifiers, linear-amplifiers, instrumentation amplifiers, and buffer amplifiers. This device offers a high input impedance with low noise, high voltage gain, and low distortion. It is widely used in applications such as audio processing, signal conditioning, automatic gain control, and active filter circuits.The TL071ACN is a dual-channel, high-gain operational amplifier (op-amp) with a low noise figure and an operating voltage range of ±14V. It features an on-chip compensation network and a low offset current. The high gain and low offset current allow the device to achieve high fidelity in precision circuits. The input impedance of the device is also high, allowing it to be used in AC-coupled circuits.The device is constructed of two differential (two output) amplifiers with a single voltage supply. It has a wide range of gains, typically greater than 1000 at DC and can be adjusted by an external resistor network. The device has a relatively low output impedance and can be used as either an inverting or non-inverting amplifier.The TL071ACN is well-suited for use in high-performance audio applications, such as tone-staging controllers, power amplifiers, mixing consoles, and pre-amps. The device also finds application in instrumentation amplifiers, signal conditioning, and automatic gain control (AGC) circuits.The TL071ACN is typically manufactured in a dual in-line package, with a knurled metal can. The device pins are readily available for use in through-hole applications. The device is also available in surface-mount packages, such as SOT23-5, SOT223, and TSSOP8.The TL071ACN has two voltage-feedback inverting amplifier inputs that are commonly referred to as "negative input" and "positive input." These two inputs allow the device to be used as either an inverting or non-inverting amplifier. The gain of the device is the ratio of the voltage-difference between the negative and positive inputs to the output voltage.The TL071ACN can also be used as a voltage-follower, where the output voltage is equal to the input voltage. When used as a voltage-follower, the gain can be expressed as the difference between the output voltage and the input voltage divided by the input voltage.To reduce the device\'s input offset voltage and the effect of input bias currents, the device has an independent compensation network, which is connected between the two input pins and the ground. The compensation network consists of an on-chip resistor, capacitor, and a second resistor, which is typically connected from a voltage divider between the negative input and ground.The typical power supply range for the TL071ACN device is from ±5V to ±15V. The device is capable of supplying an output current of up to 13mA. The output voltage of the device is typically greater than the power supply voltage.In summary, the TL071ACN is a general-purpose operational amplifier with a low noise figure, low distortion, and high input impedance. The device is used in a variety of applications, including audio-processing, signal-conditioning, automatic gain control, and active-filter circuits. The device is designed for use in through-hole and surface-mount packages and is capable of operating with a wide range of voltage supplies. It offers low offset current and adjustable gain, which allows the device to be used in precision circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description