TL072SG-13

Current - Input Bias:	65pA
Base Part Number:	TL072
Supplier Device Package:	8-SOP
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	10 V ~ 30 V, ±5 V ~ 15 V
Current - Supply:	1.4mA
Voltage - Input Offset:	3mV
Series:	--
Gain Bandwidth Product:	3MHz
Slew Rate:	13 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	J-FET
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL072SG-13 is a low-noise dual JFET-input operational amplifier and belongs to the Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps categories. It is designed for general-purpose amplifier applications and widely used in many areas. This device is characterized by low noise and good linearity, and also offers wide bandwidth and low power consumption.The TL072SG-13 has a normal voltage gain of over 200V/V, a maximum output current of 100mA, and a quiescent current of 2.5mA. In addition, it features an extremely low input bias current of 40nA and a low input offset voltage of 5mV with a maximum drift of 5µV/°C. The operating temperature range is from -40°C to 85°C. It also has a wide bandwidth of 8MHz and a power supply voltage range of 5V to 15V.The working principle of the TL072SG-13 is simple. It uses two JFETs positioned close to each other on a single chip to produce an amplified current. The amplification occurs when an input voltage passes through the JFET\'s channel and the resistance of the JFET varies with the input voltage. The amplified current is then converted to an output voltage.The TL072SG-13 is commonly used in audio systems and amplifiers, scientific and medical instrumentation, and industrial equipment where low distortion, low noise, and wide bandwidth are required. In audio systems, the TL072SG-13 is designed to provide a low-noise, low-distortion amplifier suitable for pre-amplification stages, line-level amplifiers, and microphone-level amplifiers.In scientific and medical instrumentation, the TL072SG-13 can be used to amplify the signals from sensors and transducers, and to accurately measure the signals. It is also used in industrial equipment applications where high accuracy and low noise are required to monitor, control, and measure various parameters.The TL072SG-13 combines several features that make it a great choice for many applications. It has low noise, low distortion, low input offset voltage, wide bandwidth, low power consumption, and a high voltage gain. It is a highly reliable and versatile device suitable for a variety of general-purpose amplifier applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description