TL082CDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TL082CDR is a dual-channel low-power high-voltage JFET-input operational amplifier (op-amp) designed for general-purpose use. It is a linear amplifier that is designed for instrumentation use and can be used for a range of applications including sensors, signal conditioning, bridge amplifiers and servo amplifiers. The TL082CDR is capable of high-gain, low-power operation and can operate from single or dual supplies of up to ± 18 volts.

Performance Characteristics

The TL082CDR has a high-performance design and offers good slew rate, low offset voltage and drift, and low input bias current. It is capable of extended bandwidth with excellent high-frequency gain and noise performance, making it ideally suited for audio applications. It is also stable with capacitive loads and can be used in either a single-ended or push-pull configuration. The TL082CDR is a versatile amplifier that can be used in many different applications.

Power Consumption

The TL082CDR has a low power consumption of only 45 mW (typical) in a typical application. This makes it an ideal option for battery-powered applications, as it can help to reduce battery drain. It is also designed to operate from a wide range of power supplies and can accept input from 9 to 18 volts, making it very versatile. Additionally, the device features shutdown mode, which significantly reduces its power consumption when idle and increases its battery life.

Built-in Protection Features

The TL082CDR is designed to offer excellent protection against overload, short circuit, and reverse voltage. It also features thermal shutdown protection which helps to protect the device in the case of an extended exposure to high temperatures. In addition, the device has full common-mode transient immunity, allowing it to operate in environments where switching transients or other noise sources are present. This makes it well suited for use in noisy or harsh environments.

Applications

The TL082CDR is well-suited for use in a variety of linear and instrumentation applications, including: automotive, audio, lighting control, robotics, medical, and industrial automation to name a few. It is also capable of bridged-amplifier and servo-amplifier applications, which make it versatile for a wide range of applications. Additionally, its low input bias current, low offset voltage and drift, and extended bandwidth make it ideal for audio and sensor applications. The device can also be used in telecommunications systems, instrumentation, and as a part of analog-to-digital convertors.

Working Principle

The TL082CDR works by amplifying small input voltages. It is a high-performance linear amplifier that can operate using single or dual power supplies. It has two separate amplifiers on a single monolithic chip which can be used in either a dual-ended or push-pull configuration. The amplifier is composed of two JFET-input operational amplifiers with high slew rate, low offset voltage and drift, and low input bias current characteristics. It works by taking an input signal and amplifying it using the two separate amplifiers on the chip. The output of each amplifier is then combined and sent out to the output. The device is able to provide high-gain, low-power operation and is well-suited for a range of linear and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference