TL16C550DIPFB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Universal asynchronous receiver-transmitter (UART) is an interface commonly found in microprocessors to facilitate serial communication. UART devices are typically used to interface between different devices such as a computer and a modem, a computer and a printer, or in embedded systems to interface between two different peripheral components. The TL16C550DIPFB is one such UART device.

The TL16C550DIPFB is a single-chip UART device which consists of two independent UARTs and two FIFOs. It is designed to embed two full UART cores with two 8-byte deep FIFOs and is available in a 28-pin DIP and 44-pin DIP package. Each UART core can operate independently, allowing for simultaneous transmissions and receptions. The device also features Enhanced features such as low-power suspend modes, higher baud rates, IrDA-compatible FIR encoder/decoder, and flexible baud rate generation.

The TL16C550DIPFB is ideally suited for applications requiring multiple UARTs with high frequency data processing, such as industrial process control, instrumentation, medical equipment and telecom systems. It can be used to provide an efficient and reliable method for inter-component communication in embedded designs. The device also is designed to handle data transfers asynchronously, allowing devices to communicate data without any shared timing reference. This makes it ideal for applications with varying communication speeds since it can easily accommodate the change in data speed.

In terms of working principles, the TL16C550DIPFB UART can transmit data at a rate of up to 500 Kbps in a 16C550 UART mode. It uses the clock signals TCLK0, TCLK1 to synchronize two independent UARTs, which can be independently programmed by updating the TLCRx register. The device utilizes a Bit or Byte oriented data transmission and it can also be configured for 7-bit or 8-bit data formats. The TL16C550DIPFB also features a 16-byte receive FIFO buffer and a 16-byte transmit FIFO buffer. The FIFOs are used to temporarily store the received or transmitted data, which helps to reduce transmission latency and the number of bytes to be transferred.

The TL16C550DIPFB also features a number of control, status and interrupt capability registers that can be used to configure and control the device. These registers are used to set the serial port parameters such as signal transfer direction, length of data, data speed, parity and framing signals. Interrupts can be enabled and disabled to handle communication-related errors and other errors. The device also supports a number of wake-up signal connections, which can be used to wake up the system from low-power suspend mode by controlling the modem inputs.

In summary, the TL16C550DIPFB is a single-chip UART device which is designed to embed two full UART cores with two 8-byte deep FIFOs, allowing for simultaneous transmissions and receptions. It is ideally suited for applications requiring multiple UARTs with high frequency data processing and is able to handle data transfers asynchronously, making it an ideal option for applications with varying communication speeds. As a UART interface, the TL16C550DIPFB offers an efficient and reliable way for inter-component communication in embedded designs.

The specific data is subject to PDF, and the above content is for reference